Faital PRO 15FH520-4
Thiele-Small parameters
| Nominal size | 15" |
|---|---|
| Impedance | 4 Ω |
| Fs | 38 Hz |
| Qts | 0.337 |
| Qes | 0.35 |
| Qms | 9 |
| Vas | 156.6 L |
| Sd | 813 cm² |
| Xmax | 7.8 mm |
| Re | 2.7 Ω |
| Bl | 13.8 T·m |
| Mms | 103.8 g |
| Pe | 600 W |
| Sensitivity | 100.6 dB |
Alignment hint
| EBP | 109 · ported |
|---|---|
| Sealed Vb (Qtc ≈ 0.71) | ≈ 46 L |
EBP > 100: favours a ported (bass-reflex) alignment.
Rules of thumb from T/S parameters only. Verify against a real simulation before cutting wood.
Substitute candidates
| Driver | Fs (Hz) | Qts | Vas (L) | Xmax (mm) | Sens (dB) | Fit | Notes | Compare |
|---|---|---|---|---|---|---|---|---|
| Faital PRO 15FH520-4 v2021 | 38 = | 0.337 = | 146.2 -10.4 | 7.4 -0.4 | 100.3 -0.3 | close | Xmax 7.4 mm < 7.8 mm: lower excursion-limited SPL | + |
| Oberton 15MB500 | 41.5 +3.5 | 0.339 = | 161.54 +4.94 | 7.75 -0.05 | 100 -0.6 | close | 8 Ω vs 4 Ω: amp load changes · Xmax 7.75 mm < 7.8 mm: lower excursion-limited SPL | + |
| PD PD 15BR40 | 38.7 +0.7 | 0.34 = | 158.3 +1.7 | 7.9 +0.1 | 98.1 -2.5 | close | 8 Ω vs 4 Ω: amp load changes | + |
| Precision Devices PD 15BR40 | 38.7 +0.7 | 0.34 = | 158.3 +1.7 | 7.9 +0.1 | 98.1 -2.5 | close | 8 Ω vs 4 Ω: amp load changes | + |
| Faital PRO 15FH520 | 38 = | 0.34 = | 153.2 -3.4 | 9.15 +1.35 | 97 -3.6 | close | + | |
| P.Audio S15-100LF | 38 = | 0.35 +0.01 | 169.1 +12.5 | 7.8 = | 98 -2.6 | close | 8 Ω vs 4 Ω: amp load changes | + |
| Eminence KAPPA PRO 15 LFC | 37 -1 | 0.319 -0.02 | 183.2 +26.6 | 7.9 +0.1 | 100.3 -0.3 | close | + | |
| BMS 15S330 | 39 +1 | 0.32 -0.02 | 152 -4.6 | 8 +0.2 | 98 -2.6 | close | 8 Ω vs 4 Ω: amp load changes | + |
| JBL 1500 GTI | 35 -3 | 0.339 = | 189 +32.4 | 8.2 +0.4 | 100.6 = | close | + | |
| Faital PRO 15FX560 | 38 = | 0.3 -0.04 | 159 +2.4 | 9.42 +1.62 | 99 -1.6 | close | 8 Ω vs 4 Ω: amp load changes | + |
Compare the closest 3 against the 15FH520-4 →
Ranked on parameter similarity only (Qts, Fs, Vas, Xmax, sensitivity). Same nominal size required. A hint, not a simulation, model the swap before cutting or buying.
Used in enclosures (0)
No enclosure in the catalog uses this driver yet.