Faital PRO 15FH500
Thiele-Small parameters
| Nominal size | 15" |
|---|---|
| Impedance | 8 Ω |
| Fs | 35 Hz |
| Qts | 0.31 |
| Qes | 0.32 |
| Qms | 10.4 |
| Vas | 199.2 L |
| Sd | 847 cm² |
| Xmax | 9.25 mm |
| Re | 5.1 Ω |
| Mms | 104 g |
| Pe | 500 W |
| Sensitivity | 98 dB |
Alignment hint
| EBP | 109 · ported |
|---|---|
| Sealed Vb (Qtc ≈ 0.71) | ≈ 47.4 L |
EBP > 100: favours a ported (bass-reflex) alignment.
Rules of thumb from T/S parameters only. Verify against a real simulation before cutting wood.
Substitute candidates
| Driver | Fs (Hz) | Qts | Vas (L) | Xmax (mm) | Sens (dB) | Fit | Notes | Compare |
|---|---|---|---|---|---|---|---|---|
| Eminence KAPPA PRO 15 LF-2 | 35 = | 0.307 = | 198.8 -0.4 | 8.2 -1.05 | 97.1 -0.9 | close | Xmax 8.2 mm < 9.25 mm: lower excursion-limited SPL | + |
| Monacor SP-15/500FH | 35 = | 0.31 = | 218 +18.8 | 7.8 -1.45 | 98.6 +0.6 | close | Xmax 7.8 mm < 9.25 mm: lower excursion-limited SPL | + |
| Eminence KAPPA PRO 15 LF v2 | 35 = | 0.31 = | 172.5 -26.7 | 8.7 -0.55 | 96.8 -1.2 | close | Xmax 8.7 mm < 9.25 mm: lower excursion-limited SPL | + |
| Beyma 15LX60 | 35 = | 0.346 +0.04 | 215 +15.8 | 9 -0.25 | 97.7 -0.3 | close | Xmax 9 mm < 9.25 mm: lower excursion-limited SPL | + |
| Faital PRO 15FH510 | 35 = | 0.26 -0.05 | 191.8 -7.4 | 9.25 = | 98 = | close | + | |
| Eminence Kappa Pro-15LF | 35 = | 0.3 -0.01 | 198.8 -0.4 | 6.7 -2.55 | 97.8 -0.2 | close | Xmax 6.7 mm < 9.25 mm: lower excursion-limited SPL | + |
| PD PDN 15BR40 | 35.7 +0.7 | 0.338 +0.03 | 224.8 +25.6 | 9.8 +0.55 | 98.5 +0.5 | close | + | |
| Precision Devices PDN 15BR40 | 35.7 +0.7 | 0.338 +0.03 | 224.8 +25.6 | 9.8 +0.55 | 98.5 +0.5 | close | + | |
| DAS Audio 15S | 35 = | 0.287 -0.02 | 188 -11.2 | 8 -1.25 | 97.4 -0.6 | close | Xmax 8 mm < 9.25 mm: lower excursion-limited SPL | + |
| Faital PRO 15FH500 | 33 -2 | 0.28 -0.03 | 209.5 +10.3 | 9.45 +0.2 | 97 -1 | close | 4 Ω vs 8 Ω: amp load changes | + |
Compare the closest 3 against the 15FH500 →
Ranked on parameter similarity only (Qts, Fs, Vas, Xmax, sensitivity). Same nominal size required. A hint, not a simulation, model the swap before cutting or buying.
Used in enclosures (0)
No enclosure in the catalog uses this driver yet.