Faital PRO 12RS1066

12" · 8 Ω · 1000 W · 93 dB · datasheet ↗

Thiele-Small parameters

Nominal size	12"
Impedance	8 Ω
Fs	42 Hz
Qts	0.33
Qes	0.34
Qms	13.9
Vas	31.5 L
Sd	496 cm²
Xmax	12.45 mm
Re	5 Ω
Mms	156.5 g
Pe	1000 W
Sensitivity	93 dB

Alignment hint

EBP	124 · ported
Sealed Vb (Qtc ≈ 0.71)	≈ 8.8 L

EBP > 100: favours a ported (bass-reflex) alignment.

Rules of thumb from T/S parameters only. Verify against a real simulation before cutting wood.

Substitute candidates

Driver	Fs (Hz)	Qts	Vas (L)	Xmax (mm)	Sens (dB)	Fit	Notes	Compare
Faital PRO 12HP1030	45 +3	0.3 -0.03	35.9 +4.4	12.45 =	95 +2	close		+
B&C 12BG100	39 -3	0.33 =	41 +9.5	10.5 -1.95	93 =	close	Xmax 10.5 mm < 12.45 mm: lower excursion-limited SPL	+
Faital PRO 12HP1030	45 +3	0.27 -0.06	33.2 +1.7	12.45 =	94 +1	close	4 Ω vs 8 Ω: amp load changes	+
Ciare 12.00 SW	43.61 +1.61	0.38 +0.05	32 +0.5	11.5 -0.95	90.1 -2.9	close	Xmax 11.5 mm < 12.45 mm: lower excursion-limited SPL	+
Faital PRO 12HP1060	45 +3	0.28 -0.05	36.9 +5.4	12.45 =	95 +2	usable		+
Hifonics CX12D2	36 -6	0.336 +0.01	25 -6.5	12.5 +0.05	90.1 -2.9	usable		+
B&C 12SW115	39 -3	0.25 -0.08	33 +1.5	13.8 +1.35	92 -1	usable	4 Ω vs 8 Ω: amp load changes	+
B&C 12BG76	44 +2	0.41 +0.08	32 +0.5	9.5 -2.95	92 -1	usable	500 W vs 1000 W: lower power handling · Xmax 9.5 mm < 12.45 mm: lower excursion-limited SPL	+
B&C 12SW115	38 -4	0.25 -0.08	34 +2.5	13.5 +1.05	92.5 -0.5	usable		+
Faital PRO 12RS1066	45 +3	0.44 +0.11	28.4 -3.1	12.45 =	92 -1	usable	16 Ω vs 8 Ω: amp load changes	+

Compare the closest 3 against the 12RS1066 →

Ranked on parameter similarity only (Qts, Fs, Vas, Xmax, sensitivity). Same nominal size required. A hint, not a simulation, model the swap before cutting or buying.

Used in enclosures (0)

No enclosure in the catalog uses this driver yet.