Faital PRO 12HP1060 8 Ohms

12" · 8 Ω · 1000 W · 93.8 dB · datasheet ↗

Thiele-Small parameters

Nominal size	12"
Impedance	8 Ω
Fs	45 Hz
Qts	0.283
Qes	0.29
Qms	12.1
Vas	30.1 L
Sd	469 cm²
Xmax	6.4 mm
Re	5 Ω
Bl	25 T·m
Mms	128.2 g
Pe	1000 W
Sensitivity	93.8 dB

Alignment hint

EBP	155 · ported
Sealed Vb (Qtc ≈ 0.71)	≈ 5.7 L

EBP > 100: favours a ported (bass-reflex) alignment.

Rules of thumb from T/S parameters only. Verify against a real simulation before cutting wood.

Substitute candidates

Driver	Fs (Hz)	Qts	Vas (L)	Xmax (mm)	Sens (dB)	Fit	Notes	Compare
Faital PRO 12HP1030	45 =	0.27 -0.01	33.2 +3.1	12.45 +6.05	94 +0.2	close	4 Ω vs 8 Ω: amp load changes	+
Faital PRO 12HP1060	45 =	0.28 =	36.9 +6.8	12.45 +6.05	95 +1.2	close		+
Faital PRO 12HP1060 4 Ohms	45 =	0.255 -0.03	28.2 -1.9	5.8 -0.6	96.3 +2.5	close	4 Ω vs 8 Ω: amp load changes · Xmax 5.8 mm < 6.4 mm: lower excursion-limited SPL	+
Faital PRO 12HP1030	45 =	0.3 +0.02	35.9 +5.8	12.45 +6.05	95 +1.2	close		+
B&C 12 TBX 100	42 -3	0.26 -0.02	37.5 +7.4	6.2 -0.2	94.1 +0.3	close	Xmax 6.2 mm < 6.4 mm: lower excursion-limited SPL	+
Faital PRO 12HP1060	45 =	0.25 -0.03	33.8 +3.7	12.45 +6.05	95 +1.2	close	4 Ω vs 8 Ω: amp load changes	+
Faital PRO 12RS1066	42 -3	0.33 +0.05	31.5 +1.4	12.45 +6.05	93 -0.8	usable		+
B&C 12TBX100	42 -3	0.26 -0.02	37.5 +7.4	9 +2.6	95 +1.2	usable		+
Beyma 12LEX1000Fe	49 +4	0.3 +0.02	38.4 +8.3	11 +4.6	95 +1.2	usable		+
B&C 12PS100	44 -1	0.27 -0.01	47 +16.9	8 +1.6	93 -0.8	usable	700 W vs 1000 W: lower power handling	+

Compare the closest 3 against the 12HP1060 8 Ohms →

Ranked on parameter similarity only (Qts, Fs, Vas, Xmax, sensitivity). Same nominal size required. A hint, not a simulation, model the swap before cutting or buying.

Used in enclosures (0)

No enclosure in the catalog uses this driver yet.