Faital PRO 12HP1060

12" · 4 Ω · 1000 W · 95 dB · datasheet ↗

Thiele-Small parameters

Nominal size	12"
Impedance	4 Ω
Fs	45 Hz
Qts	0.25
Qes	0.26
Qms	12.1
Vas	33.8 L
Sd	518 cm²
Xmax	12.45 mm
Re	2.9 Ω
Mms	138.7 g
Pe	1000 W
Sensitivity	95 dB

Alignment hint

EBP	173 · ported
Sealed Vb (Qtc ≈ 0.71)	≈ 4.8 L

EBP > 100: favours a ported (bass-reflex) alignment.

Rules of thumb from T/S parameters only. Verify against a real simulation before cutting wood.

Substitute candidates

Driver	Fs (Hz)	Qts	Vas (L)	Xmax (mm)	Sens (dB)	Fit	Notes	Compare
Faital PRO 12HP1030	45 =	0.27 +0.02	33.2 -0.6	12.45 =	94 -1	close		+
Faital PRO 12HP1060	45 =	0.28 +0.03	36.9 +3.1	12.45 =	95 =	close	8 Ω vs 4 Ω: amp load changes	+
Faital PRO 12HP1030	45 =	0.3 +0.05	35.9 +2.1	12.45 =	95 =	close	8 Ω vs 4 Ω: amp load changes	+
B&C 12SW115	38 -7	0.25 =	34 +0.2	13.5 +1.05	92.5 -2.5	close	8 Ω vs 4 Ω: amp load changes	+
B&C 12SW115	39 -6	0.25 =	33 -0.8	13.8 +1.35	92 -3	close		+
Beyma 12"LEX1300Nd	45 =	0.24 -0.01	43 +9.2	11 -1.45	96 +1	close	8 Ω vs 4 Ω: amp load changes · Xmax 11 mm < 12.45 mm: lower excursion-limited SPL	+
B&C 12TBX100	42 -3	0.26 +0.01	37.5 +3.7	9 -3.45	95 =	close	8 Ω vs 4 Ω: amp load changes · Xmax 9 mm < 12.45 mm: lower excursion-limited SPL	+
Beyma 12LEX1000Fe	49 +4	0.3 +0.05	38.4 +4.6	11 -1.45	95 =	usable	8 Ω vs 4 Ω: amp load changes · Xmax 11 mm < 12.45 mm: lower excursion-limited SPL	+
Faital PRO 12RS1066	42 -3	0.33 +0.08	31.5 -2.3	12.45 =	93 -2	usable	8 Ω vs 4 Ω: amp load changes	+
Faital PRO 12FX600	48 +3	0.24 -0.01	44.4 +10.6	9.9 -2.55	97 +2	usable	8 Ω vs 4 Ω: amp load changes · 700 W vs 1000 W: lower power handling · Xmax 9.9 mm < 12.45 mm: lower excursion-limited SPL	+

Compare the closest 3 against the 12HP1060 →

Ranked on parameter similarity only (Qts, Fs, Vas, Xmax, sensitivity). Same nominal size required. A hint, not a simulation, model the swap before cutting or buying.

Used in enclosures (0)

No enclosure in the catalog uses this driver yet.