Faital PRO 12HP1060 4 Ohms

12" · 4 Ω · 1000 W · 96.3 dB · datasheet ↗

Thiele-Small parameters

Nominal size	12"
Impedance	4 Ω
Fs	45 Hz
Qts	0.255
Qes	0.26
Qms	12.1
Vas	28.2 L
Sd	469 cm²
Xmax	5.8 mm
Re	2.9 Ω
Bl	20.8 T·m
Mms	137 g
Pe	1000 W
Sensitivity	96.3 dB

Alignment hint

EBP	173 · ported
Sealed Vb (Qtc ≈ 0.71)	≈ 4.2 L

EBP > 100: favours a ported (bass-reflex) alignment.

Rules of thumb from T/S parameters only. Verify against a real simulation before cutting wood.

Substitute candidates

Driver	Fs (Hz)	Qts	Vas (L)	Xmax (mm)	Sens (dB)	Fit	Notes	Compare
Faital PRO 12HP1060 8 Ohms	45 =	0.283 +0.03	30.1 +1.9	6.4 +0.6	93.8 -2.5	close	8 Ω vs 4 Ω: amp load changes	+
Faital PRO 12HP1060	45 =	0.25 -0.01	33.8 +5.6	12.45 +6.65	95 -1.3	close		+
Faital PRO 12HP1030	45 =	0.27 +0.02	33.2 +5	12.45 +6.65	94 -2.3	usable		+
B&C 12 TBX 100	42 -3	0.26 +0.01	37.5 +9.3	6.2 +0.4	94.1 -2.2	usable	8 Ω vs 4 Ω: amp load changes	+
B&C 12TBX100	42 -3	0.26 +0.01	37.5 +9.3	9 +3.2	95 -1.3	usable	8 Ω vs 4 Ω: amp load changes	+
Ascendant Audio MAYHEM 12 D2	39.7 -5.3	0.267 +0.01	21.5 -6.7	8.5 +2.7	96.4 +0.1	usable	2 Ω vs 4 Ω: amp load changes	+
Beyma 12SW1300ND	45 =	0.264 +0.01	45 +16.8	7 +1.2	95.9 -0.4	usable	8 Ω vs 4 Ω: amp load changes	+
Faital PRO 12HP1060	45 =	0.28 +0.03	36.9 +8.7	12.45 +6.65	95 -1.3	usable	8 Ω vs 4 Ω: amp load changes	+
Beyma 12"LEX1300Nd	45 =	0.24 -0.02	43 +14.8	11 +5.2	96 -0.3	usable	8 Ω vs 4 Ω: amp load changes	+
B&C 12 PS 100	44 -1	0.27 +0.02	47 +18.8	5.7 -0.1	95.2 -1.1	usable	8 Ω vs 4 Ω: amp load changes · 700 W vs 1000 W: lower power handling · Xmax 5.7 mm < 5.8 mm: lower excursion-limited SPL	+

Compare the closest 3 against the 12HP1060 4 Ohms →

Ranked on parameter similarity only (Qts, Fs, Vas, Xmax, sensitivity). Same nominal size required. A hint, not a simulation, model the swap before cutting or buying.

Used in enclosures (0)

No enclosure in the catalog uses this driver yet.