Faital PRO 12HP1030

12" · 8 Ω · 1000 W · 95 dB · datasheet ↗

Thiele-Small parameters

Nominal size	12"
Impedance	8 Ω
Fs	45 Hz
Qts	0.3
Qes	0.31
Qms	13.8
Vas	35.9 L
Sd	518 cm²
Xmax	12.45 mm
Re	5 Ω
Mms	130.5 g
Pe	1000 W
Sensitivity	95 dB

Alignment hint

EBP	145 · ported
Sealed Vb (Qtc ≈ 0.71)	≈ 7.9 L

EBP > 100: favours a ported (bass-reflex) alignment.

Rules of thumb from T/S parameters only. Verify against a real simulation before cutting wood.

Substitute candidates

Driver	Fs (Hz)	Qts	Vas (L)	Xmax (mm)	Sens (dB)	Fit	Notes	Compare
Faital PRO 12HP1060	45 =	0.28 -0.02	36.9 +1	12.45 =	95 =	close		+
Beyma 12LEX1000Fe	49 +4	0.3 =	38.4 +2.5	11 -1.45	95 =	close	Xmax 11 mm < 12.45 mm: lower excursion-limited SPL	+
Faital PRO 12HP1030	45 =	0.27 -0.03	33.2 -2.7	12.45 =	94 -1	close	4 Ω vs 8 Ω: amp load changes	+
Faital PRO 12HP1060	45 =	0.25 -0.05	33.8 -2.1	12.45 =	95 =	close	4 Ω vs 8 Ω: amp load changes	+
Faital PRO 12RS1066	42 -3	0.33 +0.03	31.5 -4.4	12.45 =	93 -2	close		+
B&C 12TBX100	42 -3	0.26 -0.04	37.5 +1.6	9 -3.45	95 =	usable	Xmax 9 mm < 12.45 mm: lower excursion-limited SPL	+
Beyma 12"LEX1300Nd	45 =	0.24 -0.06	43 +7.1	11 -1.45	96 +1	usable	Xmax 11 mm < 12.45 mm: lower excursion-limited SPL	+
B&C 12BG100	39 -6	0.33 +0.03	41 +5.1	10.5 -1.95	93 -2	usable	Xmax 10.5 mm < 12.45 mm: lower excursion-limited SPL	+
B&C 12SW115	38 -7	0.25 -0.05	34 -1.9	13.5 +1.05	92.5 -2.5	usable		+
Sica 12 PNS 4	41.7 -3.3	0.31 +0.01	50.2 +14.3	9.5 -2.95	94.5 -0.5	usable	Xmax 9.5 mm < 12.45 mm: lower excursion-limited SPL	+

Compare the closest 3 against the 12HP1030 →

Ranked on parameter similarity only (Qts, Fs, Vas, Xmax, sensitivity). Same nominal size required. A hint, not a simulation, model the swap before cutting or buying.

Used in enclosures (0)

No enclosure in the catalog uses this driver yet.