Faital PRO 12HP1030

12" · 4 Ω · 1000 W · 94 dB · datasheet ↗

Thiele-Small parameters

Nominal size	12"
Impedance	4 Ω
Fs	45 Hz
Qts	0.27
Qes	0.28
Qms	9.4
Vas	33.2 L
Sd	518 cm²
Xmax	12.45 mm
Re	2.9 Ω
Mms	141 g
Pe	1000 W
Sensitivity	94 dB

Alignment hint

EBP	161 · ported
Sealed Vb (Qtc ≈ 0.71)	≈ 5.7 L

EBP > 100: favours a ported (bass-reflex) alignment.

Rules of thumb from T/S parameters only. Verify against a real simulation before cutting wood.

Substitute candidates

Driver	Fs (Hz)	Qts	Vas (L)	Xmax (mm)	Sens (dB)	Fit	Notes	Compare
Faital PRO 12HP1060	45 =	0.25 -0.02	33.8 +0.6	12.45 =	95 +1	close		+
Faital PRO 12HP1060	45 =	0.28 +0.01	36.9 +3.7	12.45 =	95 +1	close	8 Ω vs 4 Ω: amp load changes	+
Faital PRO 12HP1030	45 =	0.3 +0.03	35.9 +2.7	12.45 =	95 +1	close	8 Ω vs 4 Ω: amp load changes	+
B&C 12SW115	39 -6	0.25 -0.02	33 -0.2	13.8 +1.35	92 -2	close		+
B&C 12SW115	38 -7	0.25 -0.02	34 +0.8	13.5 +1.05	92.5 -1.5	close	8 Ω vs 4 Ω: amp load changes	+
Faital PRO 12RS1066	42 -3	0.33 +0.06	31.5 -1.7	12.45 =	93 -1	close	8 Ω vs 4 Ω: amp load changes	+
Beyma 12LEX1000Fe	49 +4	0.3 +0.03	38.4 +5.2	11 -1.45	95 +1	usable	8 Ω vs 4 Ω: amp load changes · Xmax 11 mm < 12.45 mm: lower excursion-limited SPL	+
B&C 12TBX100	42 -3	0.26 -0.01	37.5 +4.3	9 -3.45	95 +1	usable	8 Ω vs 4 Ω: amp load changes · Xmax 9 mm < 12.45 mm: lower excursion-limited SPL	+
Beyma 12"LEX1300Nd	45 =	0.24 -0.03	43 +9.8	11 -1.45	96 +2	usable	8 Ω vs 4 Ω: amp load changes · Xmax 11 mm < 12.45 mm: lower excursion-limited SPL	+
Faital PRO 12HP1060 8 Ohms	45 =	0.283 +0.01	30.1 -3.1	6.4 -6.05	93.8 -0.2	usable	8 Ω vs 4 Ω: amp load changes · Xmax 6.4 mm < 12.45 mm: lower excursion-limited SPL	+

Compare the closest 3 against the 12HP1030 →

Ranked on parameter similarity only (Qts, Fs, Vas, Xmax, sensitivity). Same nominal size required. A hint, not a simulation, model the swap before cutting or buying.

Used in enclosures (0)

No enclosure in the catalog uses this driver yet.