Faital PRO 10RS430 vp B184423

10" · 8 Ω · 400 W · 91 dB · datasheet ↗

Thiele-Small parameters

Nominal size	10"
Impedance	8 Ω
Fs	36.3 Hz
Qts	0.293
Qes	0.31
Qms	5.46
Vas	43 L
Sd	330.1 cm²
Xmax	7 mm
Re	6.64 Ω
Bl	18.3 T·m
Mms	68.4 g
Pe	400 W
Sensitivity	91 dB

Alignment hint

EBP	117 · ported
Sealed Vb (Qtc ≈ 0.71)	≈ 8.9 L

EBP > 100: favours a ported (bass-reflex) alignment.

Rules of thumb from T/S parameters only. Verify against a real simulation before cutting wood.

Substitute candidates

Driver	Fs (Hz)	Qts	Vas (L)	Xmax (mm)	Sens (dB)	Fit	Notes	Compare
Faital PRO 10RS350	40 +3.7	0.31 +0.02	40.6 -2.4	7.17 +0.17	91 =	close	4 Ω vs 8 Ω: amp load changes · 300 W vs 400 W: lower power handling	+
Sica 10 S 3 CP	42 +5.7	0.3 +0.01	42.8 -0.2	7 =	94 +3	close		+
Faital PRO 10RS350	40 +3.7	0.37 +0.08	44.3 +1.3	7.37 +0.37	91 =	close	300 W vs 400 W: lower power handling	+
SICA 10 S 3 CP v2017	43 +6.7	0.313 +0.02	39.9 -3.1	7 =	93.6 +2.6	usable		+
Eminence KAPPALITE™ KL3010LF-8	45 +8.7	0.31 +0.02	47.33 +4.33	8.52 +1.52	92 +1	usable		+
Decware DHM 108B	35 -1.3	0.316 +0.02	53 +10	5.5 -1.5	91 =	usable	275 W vs 400 W: lower power handling · Xmax 5.5 mm < 7 mm: lower excursion-limited SPL	+
Faital PRO 10RS430 v2025	32 -4.3	0.282 -0.01	59.2 +16.2	9.2 +2.2	90.9 -0.1	usable		+
McCauley 6222	40 +3.7	0.39 +0.1	41.9 -1.1	7 =	91.5 +0.5	usable	300 W vs 400 W: lower power handling	+
Sica 10 S 3 PL	43 +6.7	0.27 -0.02	39.9 -3.1	7 =	94.5 +3.5	usable		+
Faital PRO 10RS430 v2026	32 -4.3	0.301 +0.01	61.5 +18.5	9.7 +2.7	90.8 -0.2	usable		+

Compare the closest 3 against the 10RS430 vp B184423 →

Ranked on parameter similarity only (Qts, Fs, Vas, Xmax, sensitivity). Same nominal size required. A hint, not a simulation, model the swap before cutting or buying.

Used in enclosures (0)

No enclosure in the catalog uses this driver yet.