← all drivers

Faital PRO 10PR330

10" · 16 Ω · 300 W · 95 dB · datasheet ↗

Thiele-Small parameters

Nominal size10"
Impedance16 Ω
Fs60 Hz
Qts0.36
Qes0.4
Qms3.6
Vas32.9 L
Sd348 cm²
Xmax7.27 mm
Re11.3 Ω
Mms36.1 g
Pe300 W
Sensitivity95 dB

Alignment hint

EBP150 · ported
Sealed Vb (Qtc ≈ 0.71)≈ 11.5 L

EBP > 100: favours a ported (bass-reflex) alignment.

Rules of thumb from T/S parameters only. Verify against a real simulation before cutting wood.

Substitute candidates

DriverFs (Hz)QtsVas (L)Xmax (mm)Sens (dB)FitNotesCompare
Faital PRO 10PR33060 =0.33 -0.0332.5 -0.47.37 +0.196 +1close8 Ω vs 16 Ω: amp load changes+
18 Sound 10NW75052 -80.36 =38 +5.17.1 -0.1794 -1closeXmax 7.1 mm < 7.27 mm: lower excursion-limited SPL+
Faital PRO 10FE40060 =0.41 +0.0533.6 +0.75.62 -1.6595 =close4 Ω vs 16 Ω: amp load changes · 200 W vs 300 W: lower power handling · Xmax 5.62 mm < 7.27 mm: lower excursion-limited SPL+
18 Sound 10NW75053 -70.31 -0.0534 +1.17.5 +0.2394 -1close8 Ω vs 16 Ω: amp load changes+
B&C 10CL5158 -20.38 +0.0236 +3.15.5 -1.7796 +1close8 Ω vs 16 Ω: amp load changes · 150 W vs 300 W: lower power handling · Xmax 5.5 mm < 7.27 mm: lower excursion-limited SPL+
PRV Audio 10MR100059.2 -0.80.323 -0.0431 -1.95 -2.2795.4 +0.4usable8 Ω vs 16 Ω: amp load changes · Xmax 5 mm < 7.27 mm: lower excursion-limited SPL+
Faital PRO 10FH52060 =0.32 -0.0422.7 -10.27.25 -0.0295 =usable4 Ω vs 16 Ω: amp load changes · Xmax 7.25 mm < 7.27 mm: lower excursion-limited SPL+
Faital PRO 10PR31060 =0.34 -0.0232.2 -0.74.92 -2.3598 +3usable8 Ω vs 16 Ω: amp load changes · Xmax 4.92 mm < 7.27 mm: lower excursion-limited SPL+
Beyma 10"WR30052 -80.35 -0.0142 +9.16 -1.2795 =usable8 Ω vs 16 Ω: amp load changes · Xmax 6 mm < 7.27 mm: lower excursion-limited SPL+
Beyma 10G4055 -50.314 -0.0533 +0.15 -2.2795.4 +0.4usable8 Ω vs 16 Ω: amp load changes · Xmax 5 mm < 7.27 mm: lower excursion-limited SPL+

Compare the closest 3 against the 10PR330 →

Ranked on parameter similarity only (Qts, Fs, Vas, Xmax, sensitivity). Same nominal size required. A hint, not a simulation, model the swap before cutting or buying.

Used in enclosures (0)

No enclosure in the catalog uses this driver yet.