Faital PRO 10PR310

10" · 8 Ω · 300 W · 98 dB · datasheet ↗

Thiele-Small parameters

Nominal size	10"
Impedance	8 Ω
Fs	60 Hz
Qts	0.34
Qes	0.36
Qms	5.7
Vas	32.2 L
Sd	348 cm²
Xmax	4.92 mm
Re	5.4 Ω
Mms	36.9 g
Pe	300 W
Sensitivity	98 dB

Alignment hint

EBP	167 · ported
Sealed Vb (Qtc ≈ 0.71)	≈ 9.7 L

EBP > 100: favours a ported (bass-reflex) alignment.

Rules of thumb from T/S parameters only. Verify against a real simulation before cutting wood.

Substitute candidates

Driver	Fs (Hz)	Qts	Vas (L)	Xmax (mm)	Sens (dB)	Fit	Notes	Compare
Faital PRO 10PR330	60 =	0.33 -0.01	32.5 +0.3	7.37 +2.45	96 -2	close		+
PRV Audio 10MR1000	59.2 -0.8	0.323 -0.02	31 -1.2	5 +0.08	95.4 -2.6	close		+
RCF MB 10N251 (prodance)	58.9 -1.1	0.33 -0.01	38.8 +6.6	4.8 -0.12	97.3 -0.7	close	Xmax 4.8 mm < 4.92 mm: lower excursion-limited SPL	+
Faital PRO 10PR310 8 Ohms	60 =	0.339 =	28 -4.2	4.6 -0.32	95.9 -2.1	close	Xmax 4.6 mm < 4.92 mm: lower excursion-limited SPL	+
Fane SOVEREIGN 10-275	60 =	0.343 =	42.4 +10.2	5 +0.08	97.5 -0.5	close		+
Oberton 10NMB200	58.67 -1.33	0.316 -0.02	34.93 +2.73	4.25 -0.67	98 =	close	200 W vs 300 W: lower power handling · Xmax 4.25 mm < 4.92 mm: lower excursion-limited SPL	+
18 Sound 10MB600	64 +4	0.33 -0.01	27.6 -4.6	6.5 +1.58	98 =	close	16 Ω vs 8 Ω: amp load changes	+
Faital PRO 10PR330	60 =	0.36 +0.02	32.9 +0.7	7.27 +2.35	95 -3	close	16 Ω vs 8 Ω: amp load changes	+
SB Audience BIANCO-10MW200	58 -2	0.336 =	39.3 +7.1	5.2 +0.28	96.2 -1.8	close		+
Faital PRO 10PR310 4 Ohms	55 -5	0.307 -0.03	35.2 +3	4.9 -0.02	98.5 +0.5	close	4 Ω vs 8 Ω: amp load changes · Xmax 4.9 mm < 4.92 mm: lower excursion-limited SPL	+

Compare the closest 3 against the 10PR310 →

Ranked on parameter similarity only (Qts, Fs, Vas, Xmax, sensitivity). Same nominal size required. A hint, not a simulation, model the swap before cutting or buying.

Used in enclosures (0)

No enclosure in the catalog uses this driver yet.