Faital PRO 10PR310 8 Ohms
Thiele-Small parameters
| Nominal size | 10" |
|---|---|
| Impedance | 8 Ω |
| Fs | 60 Hz |
| Qts | 0.339 |
| Qes | 0.36 |
| Qms | 5.7 |
| Vas | 28 L |
| Sd | 322 cm² |
| Xmax | 4.6 mm |
| Re | 5.4 Ω |
| Bl | 14.4 T·m |
| Mms | 36.5 g |
| Pe | 300 W |
| Sensitivity | 95.9 dB |
Alignment hint
| EBP | 167 · ported |
|---|---|
| Sealed Vb (Qtc ≈ 0.71) | ≈ 8.4 L |
EBP > 100: favours a ported (bass-reflex) alignment.
Rules of thumb from T/S parameters only. Verify against a real simulation before cutting wood.
Substitute candidates
| Driver | Fs (Hz) | Qts | Vas (L) | Xmax (mm) | Sens (dB) | Fit | Notes | Compare |
|---|---|---|---|---|---|---|---|---|
| PRV Audio 10MR1000 | 59.2 -0.8 | 0.323 -0.02 | 31 +3 | 5 +0.4 | 95.4 -0.5 | close | + | |
| Faital PRO 10PR310 | 60 = | 0.34 = | 32.2 +4.2 | 4.92 +0.32 | 98 +2.1 | close | + | |
| Faital PRO 10PR330 | 60 = | 0.33 -0.01 | 32.5 +4.5 | 7.37 +2.77 | 96 +0.1 | close | + | |
| LaVoce WAF102.51 | 66 +6 | 0.346 +0.01 | 26 -2 | 4.4 -0.2 | 96.6 +0.7 | close | Xmax 4.4 mm < 4.6 mm: lower excursion-limited SPL | + |
| LaVoce WSF102.50 | 64 +4 | 0.335 = | 29 +1 | 3.9 -0.7 | 97 +1.1 | close | Xmax 3.9 mm < 4.6 mm: lower excursion-limited SPL | + |
| 18 Sound 10MB600 | 64 +4 | 0.33 -0.01 | 27.6 -0.4 | 6.5 +1.9 | 98 +2.1 | close | 16 Ω vs 8 Ω: amp load changes | + |
| BMS 10C262 | 65 +5 | 0.368 +0.03 | 25.5 -2.5 | 5.1 +0.5 | 95.7 -0.2 | close | + | |
| Faital PRO 10HX230 | 65 +5 | 0.348 +0.01 | 25.8 -2.2 | 4 -0.6 | 96.6 +0.7 | close | Xmax 4 mm < 4.6 mm: lower excursion-limited SPL | + |
| Faital PRO 10PR330 | 60 = | 0.36 +0.02 | 32.9 +4.9 | 7.27 +2.67 | 95 -0.9 | close | 16 Ω vs 8 Ω: amp load changes | + |
| Celestion BN10-300X8 | 64.3 +4.3 | 0.382 +0.04 | 28.8 +0.8 | 4 -0.6 | 95.8 -0.1 | close | Xmax 4 mm < 4.6 mm: lower excursion-limited SPL | + |
Compare the closest 3 against the 10PR310 8 Ohms →
Ranked on parameter similarity only (Qts, Fs, Vas, Xmax, sensitivity). Same nominal size required. A hint, not a simulation, model the swap before cutting or buying.
Used in enclosures (0)
No enclosure in the catalog uses this driver yet.