Faital PRO 10PR310
Thiele-Small parameters
| Nominal size | 10" |
|---|---|
| Impedance | 16 Ω |
| Fs | 65 Hz |
| Qts | 0.47 |
| Qes | 0.52 |
| Qms | 5.3 |
| Vas | 29 L |
| Sd | 348 cm² |
| Xmax | 4.92 mm |
| Re | 12.1 Ω |
| Mms | 35 g |
| Pe | 300 W |
| Sensitivity | 97 dB |
Alignment hint
| EBP | 125 · ported |
|---|---|
| Sealed Vb (Qtc ≈ 0.71) | ≈ 23 L |
EBP > 100: favours a ported (bass-reflex) alignment.
Rules of thumb from T/S parameters only. Verify against a real simulation before cutting wood.
Substitute candidates
| Driver | Fs (Hz) | Qts | Vas (L) | Xmax (mm) | Sens (dB) | Fit | Notes | Compare |
|---|---|---|---|---|---|---|---|---|
| Faital PRO 10PR300 | 65 = | 0.48 +0.01 | 30.6 +1.6 | 4.92 = | 97 = | close | + | |
| LaVoce WSF102.00 | 65 = | 0.45 -0.02 | 34.03 +5.03 | 5.2 +0.28 | 97 = | close | 8 Ω vs 16 Ω: amp load changes · 175 W vs 300 W: lower power handling | + |
| 18 Sound 10W650 | 67 +2 | 0.48 +0.01 | 26 -3 | 5.7 +0.78 | 96 -1 | close | 8 Ω vs 16 Ω: amp load changes | + |
| Radian CRS1030 | 65 = | 0.472 = | 35.3 +6.3 | 5.5 +0.58 | 96.2 -0.8 | close | 8 Ω vs 16 Ω: amp load changes | + |
| Eminence DELTA-10A-2 | 69.7 +4.7 | 0.44 -0.03 | 29.73 +0.73 | 6.39 +1.47 | 96.7 -0.3 | close | 8 Ω vs 16 Ω: amp load changes | + |
| Celestion BN10-300X | 64.2 -0.8 | 0.432 -0.04 | 29.2 +0.2 | 4 -0.92 | 96.9 -0.1 | close | 8 Ω vs 16 Ω: amp load changes · Xmax 4 mm < 4.92 mm: lower excursion-limited SPL | + |
| LaVoce FBASS10-18 | 65 = | 0.43 -0.04 | 32.4 +3.4 | 4.5 -0.42 | 96 -1 | close | 8 Ω vs 16 Ω: amp load changes · 150 W vs 300 W: lower power handling · Xmax 4.5 mm < 4.92 mm: lower excursion-limited SPL | + |
| Faital PRO 10FE400 | 60 -5 | 0.47 = | 35.3 +6.3 | 5.42 +0.5 | 96 -1 | close | 8 Ω vs 16 Ω: amp load changes · 200 W vs 300 W: lower power handling | + |
| 18 Sound 10W650 | 64 -1 | 0.41 -0.06 | 27 -2 | 5.7 +0.78 | 96 -1 | close | + | |
| Hartke 10XL16 | 69.3 +4.3 | 0.47 = | 27.3 -1.7 | 5 +0.08 | 92.5 -4.5 | close | + |
Compare the closest 3 against the 10PR310 →
Ranked on parameter similarity only (Qts, Fs, Vas, Xmax, sensitivity). Same nominal size required. A hint, not a simulation, model the swap before cutting or buying.
Used in enclosures (0)
No enclosure in the catalog uses this driver yet.