Faital PRO 10PR300

10" · 8 Ω · 300 W · 98 dB · datasheet ↗

Thiele-Small parameters

Nominal size	10"
Impedance	8 Ω
Fs	60 Hz
Qts	0.28
Qes	0.29
Qms	5.8
Vas	42.2 L
Sd	348 cm²
Xmax	4.92 mm
Re	5.4 Ω
Mms	28.2 g
Pe	300 W
Sensitivity	98 dB

Alignment hint

EBP	207 · ported
Sealed Vb (Qtc ≈ 0.71)	≈ 7.8 L

EBP > 100: favours a ported (bass-reflex) alignment.

Rules of thumb from T/S parameters only. Verify against a real simulation before cutting wood.

Substitute candidates

Driver	Fs (Hz)	Qts	Vas (L)	Xmax (mm)	Sens (dB)	Fit	Notes	Compare
Fane SOVEREIGN 10-300	58 -2	0.313 +0.03	43 +0.8	4.8 -0.12	97.5 -0.5	close	Xmax 4.8 mm < 4.92 mm: lower excursion-limited SPL	+
PHL Audio 3430	57 -3	0.271 -0.01	41 -1.2	4.2 -0.72	97.7 -0.3	close	Xmax 4.2 mm < 4.92 mm: lower excursion-limited SPL	+
18 Sound 10W500	53 -7	0.29 +0.01	45.2 +3	5.5 +0.58	98 =	close		+
Jensen JB 10/150	60 =	0.295 +0.01	42 -0.2	3.7 -1.22	97.8 -0.2	close	150 W vs 300 W: lower power handling · Xmax 3.7 mm < 4.92 mm: lower excursion-limited SPL	+
RCF MB 10N251	55 -5	0.271 -0.01	38.8 -3.4	4.6 -0.32	97.4 -0.6	close	Xmax 4.6 mm < 4.92 mm: lower excursion-limited SPL	+
Fane SOVEREIGN 10-275	60 =	0.343 +0.06	42.4 +0.2	5 +0.08	97.5 -0.5	close		+
Fane SOVEREIGN PRO 10-300	58 -2	0.322 +0.04	41 -1.2	4.7 -0.22	97.2 -0.8	close	Xmax 4.7 mm < 4.92 mm: lower excursion-limited SPL	+
Faital PRO 10PR310	55 -5	0.31 +0.03	40.3 -1.9	4.92 =	97 -1	close	4 Ω vs 8 Ω: amp load changes	+
B&C 10 PS 26 (prodance)	53.4 -6.6	0.267 -0.01	39.5 -2.7	5.4 +0.48	96.8 -1.2	close		+
Eminence KAPPALITE 3010 H0	61.4 +1.4	0.263 -0.02	37.2 -5	4.4 -0.52	98.7 +0.7	close	Xmax 4.4 mm < 4.92 mm: lower excursion-limited SPL	+

Compare the closest 3 against the 10PR300 →

Ranked on parameter similarity only (Qts, Fs, Vas, Xmax, sensitivity). Same nominal size required. A hint, not a simulation, model the swap before cutting or buying.

Used in enclosures (0)

No enclosure in the catalog uses this driver yet.