Faital PRO 10PR300-16
Thiele-Small parameters
| Nominal size | 10" |
|---|---|
| Impedance | 16 Ω |
| Fs | 65 Hz |
| Qts | 0.477 |
| Qes | 0.52 |
| Qms | 5.8 |
| Vas | 26.7 L |
| Sd | 322 cm² |
| Xmax | 4.9 mm |
| Re | 12.1 Ω |
| Bl | 17.6 T·m |
| Mms | 32.6 g |
| Pe | 300 W |
| Sensitivity | 91.7 dB |
Alignment hint
| EBP | 125 · ported |
|---|---|
| Sealed Vb (Qtc ≈ 0.71) | ≈ 22.3 L |
EBP > 100: favours a ported (bass-reflex) alignment.
Rules of thumb from T/S parameters only. Verify against a real simulation before cutting wood.
Substitute candidates
| Driver | Fs (Hz) | Qts | Vas (L) | Xmax (mm) | Sens (dB) | Fit | Notes | Compare |
|---|---|---|---|---|---|---|---|---|
| Hartke 10XL16 | 69.3 +4.3 | 0.47 -0.01 | 27.3 +0.6 | 5 +0.1 | 92.5 +0.8 | close | + | |
| 18 Sound 10W650 | 67 +2 | 0.48 = | 26 -0.7 | 5.7 +0.8 | 96 +4.3 | close | 8 Ω vs 16 Ω: amp load changes | + |
| Faital PRO 10PR310 | 65 = | 0.47 -0.01 | 29 +2.3 | 4.92 +0.02 | 97 +5.3 | close | + | |
| LaVoce SSF102.50L | 50 -15 | 0.475 = | 25.6 -1.1 | 5.7 +0.8 | 91.4 -0.3 | close | 8 Ω vs 16 Ω: amp load changes | + |
| Faital PRO 10PR300 | 65 = | 0.48 = | 30.6 +3.9 | 4.92 +0.02 | 97 +5.3 | close | + | |
| Celestion BN10-300X(4) | 64.2 -0.8 | 0.43 -0.05 | 29.2 +2.5 | 4 -0.9 | 93.8 +2.1 | usable | 4 Ω vs 16 Ω: amp load changes · 150 W vs 300 W: lower power handling · Xmax 4 mm < 4.9 mm: lower excursion-limited SPL | + |
| 18 Sound 10W650 | 64 -1 | 0.41 -0.07 | 27 +0.3 | 5.7 +0.8 | 96 +4.3 | usable | + | |
| Radian CRS1030 | 65 = | 0.472 -0.01 | 35.3 +8.6 | 5.5 +0.6 | 96.2 +4.5 | usable | 8 Ω vs 16 Ω: amp load changes | + |
| B&C 10 FCX 64 | 63 -2 | 0.417 -0.06 | 25 -1.7 | 4.4 -0.5 | 95.1 +3.4 | usable | 8 Ω vs 16 Ω: amp load changes · Xmax 4.4 mm < 4.9 mm: lower excursion-limited SPL | + |
| Celestion BL10-200X | 73 +8 | 0.48 = | 22.74 -3.96 | 4 -0.9 | 93.8 +2.1 | usable | 8 Ω vs 16 Ω: amp load changes · 200 W vs 300 W: lower power handling · Xmax 4 mm < 4.9 mm: lower excursion-limited SPL | + |
Compare the closest 3 against the 10PR300-16 →
Ranked on parameter similarity only (Qts, Fs, Vas, Xmax, sensitivity). Same nominal size required. A hint, not a simulation, model the swap before cutting or buying.
Used in enclosures (0)
No enclosure in the catalog uses this driver yet.