Faital PRO 10HX230
Thiele-Small parameters
| Nominal size | 10" |
|---|---|
| Impedance | 8 Ω |
| Fs | 65 Hz |
| Qts | 0.348 |
| Qes | 0.37 |
| Qms | 5.8 |
| Vas | 25.8 L |
| Sd | 321 cm² |
| Xmax | 4 mm |
| Re | 5.3 Ω |
| Bl | 14 T·m |
| Mms | 33.6 g |
| Pe | 250 W |
| Sensitivity | 96.6 dB |
Alignment hint
| EBP | 176 · ported |
|---|---|
| Sealed Vb (Qtc ≈ 0.71) | ≈ 8.2 L |
EBP > 100: favours a ported (bass-reflex) alignment.
Rules of thumb from T/S parameters only. Verify against a real simulation before cutting wood.
Substitute candidates
| Driver | Fs (Hz) | Qts | Vas (L) | Xmax (mm) | Sens (dB) | Fit | Notes | Compare |
|---|---|---|---|---|---|---|---|---|
| LaVoce WAF102.51 | 66 +1 | 0.346 = | 26 +0.2 | 4.4 +0.4 | 96.6 = | close | + | |
| BMS 10C262 | 65 = | 0.368 +0.02 | 25.5 -0.3 | 5.1 +1.1 | 95.7 -0.9 | close | + | |
| LaVoce WSF102.50 | 64 -1 | 0.335 -0.01 | 29 +3.2 | 3.9 -0.1 | 97 +0.4 | close | Xmax 3.9 mm < 4 mm: lower excursion-limited SPL | + |
| Faital PRO 10PR310 8 Ohms | 60 -5 | 0.339 -0.01 | 28 +2.2 | 4.6 +0.6 | 95.9 -0.7 | close | + | |
| Celestion BN10-300X8 | 64.3 -0.7 | 0.382 +0.03 | 28.8 +3 | 4 = | 95.8 -0.8 | close | + | |
| Monacor SP-25A/200NEO | 69 +4 | 0.349 = | 25 -0.8 | 3.1 -0.9 | 97.2 +0.6 | close | Xmax 3.1 mm < 4 mm: lower excursion-limited SPL | + |
| 18 Sound 10MB600 | 64 -1 | 0.33 -0.02 | 27.6 +1.8 | 6.5 +2.5 | 98 +1.4 | close | 16 Ω vs 8 Ω: amp load changes | + |
| 18 Sound 10NMB420 | 65 = | 0.33 -0.02 | 30 +4.2 | 4 = | 99 +2.4 | close | 16 Ω vs 8 Ω: amp load changes | + |
| Beyma 10MCS 500 | 65 = | 0.31 -0.04 | 24 -1.8 | 8 +4 | 96.5 -0.1 | close | + | |
| Fane 10-275 | 55 -10 | 0.356 +0.01 | 26.1 +0.3 | 4.1 +0.1 | 94.1 -2.5 | close | + |
Compare the closest 3 against the 10HX230 →
Ranked on parameter similarity only (Qts, Fs, Vas, Xmax, sensitivity). Same nominal size required. A hint, not a simulation, model the swap before cutting or buying.
Used in enclosures (0)
No enclosure in the catalog uses this driver yet.