Faital PRO 10FH530

10" · 8 Ω · 500 W · 97 dB · datasheet ↗

Thiele-Small parameters

Nominal size	10"
Impedance	8 Ω
Fs	60 Hz
Qts	0.25
Qes	0.25
Qms	12.4
Vas	23.5 L
Sd	347 cm²
Xmax	7.5 mm
Re	5.1 Ω
Mms	50.3 g
Pe	500 W
Sensitivity	97 dB

Alignment hint

EBP	240 · ported
Sealed Vb (Qtc ≈ 0.71)	≈ 3.4 L

EBP > 100: favours a ported (bass-reflex) alignment.

Rules of thumb from T/S parameters only. Verify against a real simulation before cutting wood.

Substitute candidates

Driver	Fs (Hz)	Qts	Vas (L)	Xmax (mm)	Sens (dB)	Fit	Notes	Compare
Faital PRO 10FH500	60 =	0.25 =	24.2 +0.7	7.25 -0.25	96 -1	close	4 Ω vs 8 Ω: amp load changes · Xmax 7.25 mm < 7.5 mm: lower excursion-limited SPL	+
Faital PRO 10FH500	60 =	0.26 +0.01	25.8 +2.3	7.5 =	96 -1	close		+
18 Sound 10NTLW2500	61 +1	0.27 +0.02	22 -1.5	7.6 +0.1	96.5 -0.5	close	4 Ω vs 8 Ω: amp load changes	+
Faital PRO 10FH520	60 =	0.29 +0.04	23.5 =	7.25 -0.25	97 =	close	Xmax 7.25 mm < 7.5 mm: lower excursion-limited SPL	+
Beyma 10MC500Nd	58 -2	0.24 -0.01	29 +5.5	8 +0.5	97 =	close		+
B&C 10NDL88	61 +1	0.25 =	18.4 -5.1	8.1 +0.6	96 -1	close		+
Beyma 10MC500	65 +5	0.29 +0.04	24 +0.5	8 +0.5	97 =	close		+
B&C 10NW64	59 -1	0.26 +0.01	22 -1.5	6 -1.5	96 -1	close	300 W vs 500 W: lower power handling · Xmax 6 mm < 7.5 mm: lower excursion-limited SPL	+
Beyma 10MC700Nd	63 +3	0.22 -0.03	20 -3.5	7 -0.5	97 =	close	Xmax 7 mm < 7.5 mm: lower excursion-limited SPL	+
Beyma 10MCS 500	65 +5	0.31 +0.06	24 +0.5	8 +0.5	96.5 -0.5	close		+

Compare the closest 3 against the 10FH530 →

Ranked on parameter similarity only (Qts, Fs, Vas, Xmax, sensitivity). Same nominal size required. A hint, not a simulation, model the swap before cutting or buying.

Used in enclosures (0)

No enclosure in the catalog uses this driver yet.