Faital PRO 10FH530

10" · 16 Ω · 500 W · 96 dB · datasheet ↗

Thiele-Small parameters

Nominal size	10"
Impedance	16 Ω
Fs	67 Hz
Qts	0.39
Qes	0.4
Qms	10.9
Vas	20.2 L
Sd	347 cm²
Xmax	7.45 mm
Re	12.8 Ω
Mms	47 g
Pe	500 W
Sensitivity	96 dB

Alignment hint

EBP	168 · ported
Sealed Vb (Qtc ≈ 0.71)	≈ 8.8 L

EBP > 100: favours a ported (bass-reflex) alignment.

Rules of thumb from T/S parameters only. Verify against a real simulation before cutting wood.

Substitute candidates

Driver	Fs (Hz)	Qts	Vas (L)	Xmax (mm)	Sens (dB)	Fit	Notes	Compare
18 Sound 10NTLW2500	66 -1	0.39 =	20.9 +0.7	7.6 +0.15	96 =	close		+
Faital PRO 10FH520	65 -2	0.41 +0.02	22.7 +2.5	7 -0.45	96 =	close	Xmax 7 mm < 7.45 mm: lower excursion-limited SPL	+
Faital PRO 10FH500	65 -2	0.42 +0.03	19.2 -1	7.25 -0.2	95 -1	close	Xmax 7.25 mm < 7.45 mm: lower excursion-limited SPL	+
18 Sound 10NTLW2500	65 -2	0.33 -0.06	21 +0.8	7.6 +0.15	96.5 +0.5	close	8 Ω vs 16 Ω: amp load changes	+
P.Audio SN-10MB	70 +3	0.397 +0.01	19 -1.2	5 -2.45	95.6 -0.4	close	8 Ω vs 16 Ω: amp load changes · Xmax 5 mm < 7.45 mm: lower excursion-limited SPL	+
18 Sound 10NTLW3500	65 -2	0.35 -0.04	16 -4.2	7.9 +0.45	95 -1	close	8 Ω vs 16 Ω: amp load changes	+
B&C 10CLA64	72 +5	0.41 +0.02	21 +0.8	4.5 -2.95	96 =	usable	250 W vs 500 W: lower power handling · Xmax 4.5 mm < 7.45 mm: lower excursion-limited SPL	+
B&C 10NDL88	67 =	0.32 -0.07	15.6 -4.6	7.8 +0.35	95.5 -0.5	usable		+
Beyma 10MCS 500	65 -2	0.31 -0.08	24 +3.8	8 +0.55	96.5 +0.5	usable	8 Ω vs 16 Ω: amp load changes	+
18 Sound 10NTLW3500	64 -3	0.45 +0.06	18.1 -2.1	6.4 -1.05	94 -2	usable	Xmax 6.4 mm < 7.45 mm: lower excursion-limited SPL	+

Compare the closest 3 against the 10FH530 →

Ranked on parameter similarity only (Qts, Fs, Vas, Xmax, sensitivity). Same nominal size required. A hint, not a simulation, model the swap before cutting or buying.

Used in enclosures (0)

No enclosure in the catalog uses this driver yet.