Faital PRO 10FH520

10" · 8 Ω · 600 W · 97 dB · datasheet ↗

Thiele-Small parameters

Nominal size	10"
Impedance	8 Ω
Fs	60 Hz
Qts	0.29
Qes	0.3
Qms	11.1
Vas	23.5 L
Sd	347 cm²
Xmax	7.25 mm
Re	5.1 Ω
Mms	50.3 g
Pe	600 W
Sensitivity	97 dB

Alignment hint

EBP	200 · ported
Sealed Vb (Qtc ≈ 0.71)	≈ 4.8 L

EBP > 100: favours a ported (bass-reflex) alignment.

Rules of thumb from T/S parameters only. Verify against a real simulation before cutting wood.

Substitute candidates

Driver	Fs (Hz)	Qts	Vas (L)	Xmax (mm)	Sens (dB)	Fit	Notes	Compare
Beyma 10MC500	65 +5	0.29 =	24 +0.5	8 +0.75	97 =	close		+
Faital PRO 10FH530	60 =	0.25 -0.04	23.5 =	7.5 +0.25	97 =	close		+
18 Sound 10NTLW2500	61 +1	0.27 -0.02	22 -1.5	7.6 +0.35	96.5 -0.5	close	4 Ω vs 8 Ω: amp load changes	+
Beyma 10MCS 500	65 +5	0.31 +0.02	24 +0.5	8 +0.75	96.5 -0.5	close		+
Faital PRO 10FH520	60 =	0.32 +0.03	22.7 -0.8	7.25 =	95 -2	close	4 Ω vs 8 Ω: amp load changes	+
Faital PRO 10FH500	60 =	0.25 -0.04	24.2 +0.7	7.25 =	96 -1	close	4 Ω vs 8 Ω: amp load changes	+
Faital PRO 10FH500	60 =	0.26 -0.03	25.8 +2.3	7.5 +0.25	96 -1	close		+
B&C 10NW76	68 +8	0.29 =	18.5 -5	7 -0.25	96.8 -0.2	close	16 Ω vs 8 Ω: amp load changes · 400 W vs 600 W: lower power handling · Xmax 7 mm < 7.25 mm: lower excursion-limited SPL	+
18 Sound 10NTLW2500	65 +5	0.33 +0.04	21 -2.5	7.6 +0.35	96.5 -0.5	close		+
B&C 10NW64	59 -1	0.26 -0.03	22 -1.5	6 -1.25	96 -1	close	300 W vs 600 W: lower power handling · Xmax 6 mm < 7.25 mm: lower excursion-limited SPL	+

Compare the closest 3 against the 10FH520 →

Ranked on parameter similarity only (Qts, Fs, Vas, Xmax, sensitivity). Same nominal size required. A hint, not a simulation, model the swap before cutting or buying.

Used in enclosures (0)

No enclosure in the catalog uses this driver yet.