Faital PRO 10FH520

10" · 4 Ω · 600 W · 95 dB · datasheet ↗

Thiele-Small parameters

Nominal size	10"
Impedance	4 Ω
Fs	60 Hz
Qts	0.32
Qes	0.33
Qms	13.1
Vas	22.7 L
Sd	347 cm²
Xmax	7.25 mm
Re	3.3 Ω
Mms	52.2 g
Pe	600 W
Sensitivity	95 dB

Alignment hint

EBP	182 · ported
Sealed Vb (Qtc ≈ 0.71)	≈ 5.8 L

EBP > 100: favours a ported (bass-reflex) alignment.

Rules of thumb from T/S parameters only. Verify against a real simulation before cutting wood.

Substitute candidates

Driver	Fs (Hz)	Qts	Vas (L)	Xmax (mm)	Sens (dB)	Fit	Notes	Compare
Faital PRO 10FH520	60 =	0.29 -0.03	23.5 +0.8	7.25 =	97 +2	close	8 Ω vs 4 Ω: amp load changes	+
Beyma 10MCS 500	65 +5	0.31 -0.01	24 +1.3	8 +0.75	96.5 +1.5	close	8 Ω vs 4 Ω: amp load changes	+
18 Sound 10NTLW2500	65 +5	0.33 +0.01	21 -1.7	7.6 +0.35	96.5 +1.5	close	8 Ω vs 4 Ω: amp load changes	+
18 Sound 10NTLW2500	61 +1	0.27 -0.05	22 -0.7	7.6 +0.35	96.5 +1.5	close		+
B&C 10CXN64	68 +8	0.31 -0.01	23 +0.3	5.5 -1.75	95.2 +0.2	close	8 Ω vs 4 Ω: amp load changes · 250 W vs 600 W: lower power handling · Xmax 5.5 mm < 7.25 mm: lower excursion-limited SPL	+
Beyma 10MC500	65 +5	0.29 -0.03	24 +1.3	8 +0.75	97 +2	close	8 Ω vs 4 Ω: amp load changes	+
B&C 10CL64	63 +3	0.31 -0.01	22.2 -0.5	5.2 -2.05	96 +1	close	8 Ω vs 4 Ω: amp load changes · 250 W vs 600 W: lower power handling · Xmax 5.2 mm < 7.25 mm: lower excursion-limited SPL	+
Faital PRO 10PR330	60 =	0.33 +0.01	32.5 +9.8	7.37 +0.12	96 +1	close	8 Ω vs 4 Ω: amp load changes · 300 W vs 600 W: lower power handling	+
Faital PRO 10FH500	60 =	0.25 -0.07	24.2 +1.5	7.25 =	96 +1	close		+
Faital PRO 10FH500	60 =	0.26 -0.06	25.8 +3.1	7.5 +0.25	96 +1	close	8 Ω vs 4 Ω: amp load changes	+

Compare the closest 3 against the 10FH520 →

Ranked on parameter similarity only (Qts, Fs, Vas, Xmax, sensitivity). Same nominal size required. A hint, not a simulation, model the swap before cutting or buying.

Used in enclosures (0)

No enclosure in the catalog uses this driver yet.