Faital PRO 10FH520

10" · 16 Ω · 600 W · 96 dB · datasheet ↗

Thiele-Small parameters

Nominal size	10"
Impedance	16 Ω
Fs	65 Hz
Qts	0.41
Qes	0.42
Qms	15.3
Vas	22.7 L
Sd	347 cm²
Xmax	7 mm
Re	12.8 Ω
Mms	44.5 g
Pe	600 W
Sensitivity	96 dB

Alignment hint

EBP	155 · ported
Sealed Vb (Qtc ≈ 0.71)	≈ 11.5 L

EBP > 100: favours a ported (bass-reflex) alignment.

Rules of thumb from T/S parameters only. Verify against a real simulation before cutting wood.

Substitute candidates

Driver	Fs (Hz)	Qts	Vas (L)	Xmax (mm)	Sens (dB)	Fit	Notes	Compare
18 Sound 10NTLW2500	66 +1	0.39 -0.02	20.9 -1.8	7.6 +0.6	96 =	close		+
Faital PRO 10FH530	67 +2	0.39 -0.02	20.2 -2.5	7.45 +0.45	96 =	close		+
Faital PRO 10FH500	65 =	0.42 +0.01	19.2 -3.5	7.25 +0.25	95 -1	close		+
18 Sound 10W650	64 -1	0.41 =	27 +4.3	5.7 -1.3	96 =	close	250 W vs 600 W: lower power handling · Xmax 5.7 mm < 7 mm: lower excursion-limited SPL	+
LaVoce WAF102.52	66 +1	0.412 =	23.5 +0.8	4.5 -2.5	96 =	close	8 Ω vs 16 Ω: amp load changes · 350 W vs 600 W: lower power handling · Xmax 4.5 mm < 7 mm: lower excursion-limited SPL	+
18 Sound 10NTLW2500	65 =	0.33 -0.08	21 -1.7	7.6 +0.6	96.5 +0.5	close	8 Ω vs 16 Ω: amp load changes	+
Beyma 10MCS 500	65 =	0.31 -0.1	24 +1.3	8 +1	96.5 +0.5	usable	8 Ω vs 16 Ω: amp load changes	+
BMS 10C262	65 =	0.368 -0.04	25.5 +2.8	5.1 -1.9	95.7 -0.3	usable	8 Ω vs 16 Ω: amp load changes · 400 W vs 600 W: lower power handling · Xmax 5.1 mm < 7 mm: lower excursion-limited SPL	+
Faital PRO 10FH520	60 -5	0.32 -0.09	22.7 =	7.25 +0.25	95 -1	usable	4 Ω vs 16 Ω: amp load changes	+
B&C 10CLA64	72 +7	0.41 =	21 -1.7	4.5 -2.5	96 =	usable	250 W vs 600 W: lower power handling · Xmax 4.5 mm < 7 mm: lower excursion-limited SPL	+

Compare the closest 3 against the 10FH520 →

Ranked on parameter similarity only (Qts, Fs, Vas, Xmax, sensitivity). Same nominal size required. A hint, not a simulation, model the swap before cutting or buying.

Used in enclosures (0)

No enclosure in the catalog uses this driver yet.