Faital PRO 10FH500
Thiele-Small parameters
| Nominal size | 10" |
|---|---|
| Impedance | 8 Ω |
| Fs | 60 Hz |
| Qts | 0.26 |
| Qes | 0.28 |
| Qms | 3.3 |
| Vas | 25.8 L |
| Sd | 351 cm² |
| Xmax | 7.5 mm |
| Re | 5.1 Ω |
| Mms | 47 g |
| Pe | 500 W |
| Sensitivity | 96 dB |
Alignment hint
| EBP | 214 · ported |
|---|---|
| Sealed Vb (Qtc ≈ 0.71) | ≈ 4 L |
EBP > 100: favours a ported (bass-reflex) alignment.
Rules of thumb from T/S parameters only. Verify against a real simulation before cutting wood.
Substitute candidates
| Driver | Fs (Hz) | Qts | Vas (L) | Xmax (mm) | Sens (dB) | Fit | Notes | Compare |
|---|---|---|---|---|---|---|---|---|
| Faital PRO 10FH500 | 60 = | 0.25 -0.01 | 24.2 -1.6 | 7.25 -0.25 | 96 = | close | 4 Ω vs 8 Ω: amp load changes · Xmax 7.25 mm < 7.5 mm: lower excursion-limited SPL | + |
| Faital PRO 10FH530 | 60 = | 0.25 -0.01 | 23.5 -2.3 | 7.5 = | 97 +1 | close | + | |
| 18 Sound 10NTLW2500 | 61 +1 | 0.27 +0.01 | 22 -3.8 | 7.6 +0.1 | 96.5 +0.5 | close | 4 Ω vs 8 Ω: amp load changes | + |
| Faital PRO 10FH520 | 60 = | 0.29 +0.03 | 23.5 -2.3 | 7.25 -0.25 | 97 +1 | close | Xmax 7.25 mm < 7.5 mm: lower excursion-limited SPL | + |
| B&C 10NW64 | 59 -1 | 0.26 = | 22 -3.8 | 6 -1.5 | 96 = | close | 300 W vs 500 W: lower power handling · Xmax 6 mm < 7.5 mm: lower excursion-limited SPL | + |
| Beyma 10MC500Nd | 58 -2 | 0.24 -0.02 | 29 +3.2 | 8 +0.5 | 97 +1 | close | + | |
| Beyma 10MC500 | 65 +5 | 0.29 +0.03 | 24 -1.8 | 8 +0.5 | 97 +1 | close | + | |
| B&C 10NDL88 | 61 +1 | 0.25 -0.01 | 18.4 -7.4 | 8.1 +0.6 | 96 = | close | + | |
| Beyma 10MCS 500 | 65 +5 | 0.31 +0.05 | 24 -1.8 | 8 +0.5 | 96.5 +0.5 | close | + | |
| B&C 10NDL64 | 56 -4 | 0.26 = | 31 +5.2 | 6 -1.5 | 97 +1 | close | 250 W vs 500 W: lower power handling · Xmax 6 mm < 7.5 mm: lower excursion-limited SPL | + |
Compare the closest 3 against the 10FH500 →
Ranked on parameter similarity only (Qts, Fs, Vas, Xmax, sensitivity). Same nominal size required. A hint, not a simulation, model the swap before cutting or buying.
Used in enclosures (0)
No enclosure in the catalog uses this driver yet.