Faital PRO 10FH500

10" · 4 Ω · 500 W · 96 dB · datasheet ↗

Thiele-Small parameters

Nominal size	10"
Impedance	4 Ω
Fs	60 Hz
Qts	0.25
Qes	0.26
Qms	6.2
Vas	24.2 L
Sd	351 cm²
Xmax	7.25 mm
Re	3.3 Ω
Mms	50.1 g
Pe	500 W
Sensitivity	96 dB

Alignment hint

EBP	231 · ported
Sealed Vb (Qtc ≈ 0.71)	≈ 3.5 L

EBP > 100: favours a ported (bass-reflex) alignment.

Rules of thumb from T/S parameters only. Verify against a real simulation before cutting wood.

Substitute candidates

Driver	Fs (Hz)	Qts	Vas (L)	Xmax (mm)	Sens (dB)	Fit	Notes	Compare
Faital PRO 10FH530	60 =	0.25 =	23.5 -0.7	7.5 +0.25	97 +1	close	8 Ω vs 4 Ω: amp load changes	+
Faital PRO 10FH500	60 =	0.26 +0.01	25.8 +1.6	7.5 +0.25	96 =	close	8 Ω vs 4 Ω: amp load changes	+
18 Sound 10NTLW2500	61 +1	0.27 +0.02	22 -2.2	7.6 +0.35	96.5 +0.5	close		+
Faital PRO 10FH520	60 =	0.29 +0.04	23.5 -0.7	7.25 =	97 +1	close	8 Ω vs 4 Ω: amp load changes	+
B&C 10NDL88	61 +1	0.25 =	18.4 -5.8	8.1 +0.85	96 =	close	8 Ω vs 4 Ω: amp load changes	+
B&C 10NW64	59 -1	0.26 +0.01	22 -2.2	6 -1.25	96 =	close	8 Ω vs 4 Ω: amp load changes · 300 W vs 500 W: lower power handling · Xmax 6 mm < 7.25 mm: lower excursion-limited SPL	+
Beyma 10MC500Nd	58 -2	0.24 -0.01	29 +4.8	8 +0.75	97 +1	close	8 Ω vs 4 Ω: amp load changes	+
Beyma 10MC500	65 +5	0.29 +0.04	24 -0.2	8 +0.75	97 +1	close	8 Ω vs 4 Ω: amp load changes	+
Beyma 10MCS 500	65 +5	0.31 +0.06	24 -0.2	8 +0.75	96.5 +0.5	close	8 Ω vs 4 Ω: amp load changes	+
Faital PRO 10FH520	60 =	0.32 +0.07	22.7 -1.5	7.25 =	95 -1	close		+

Compare the closest 3 against the 10FH500 →

Ranked on parameter similarity only (Qts, Fs, Vas, Xmax, sensitivity). Same nominal size required. A hint, not a simulation, model the swap before cutting or buying.

Used in enclosures (0)

No enclosure in the catalog uses this driver yet.