← all drivers

Faital PRO 10FE400

10" · 4 Ω · 200 W · 95 dB · datasheet ↗

Thiele-Small parameters

Nominal size10"
Impedance4 Ω
Fs60 Hz
Qts0.41
Qes0.44
Qms5.2
Vas33.6 L
Sd362 cm²
Xmax5.62 mm
Re3.2 Ω
Mms38.3 g
Pe200 W
Sensitivity95 dB

Alignment hint

EBP136 · ported
Sealed Vb (Qtc ≈ 0.71)≈ 17 L

EBP > 100: favours a ported (bass-reflex) alignment.

Rules of thumb from T/S parameters only. Verify against a real simulation before cutting wood.

Substitute candidates

DriverFs (Hz)QtsVas (L)Xmax (mm)Sens (dB)FitNotesCompare
Faital PRO 10PR33060 =0.36 -0.0532.9 -0.77.27 +1.6595 =close16 Ω vs 4 Ω: amp load changes+
B&C 10CL5158 -20.38 -0.0336 +2.45.5 -0.1296 +1close8 Ω vs 4 Ω: amp load changes · 150 W vs 200 W: lower power handling · Xmax 5.5 mm < 5.62 mm: lower excursion-limited SPL+
Jensen SMOOTH BS 10N/250A58 -20.429 +0.0230.9 -2.74.7 -0.9295.1 +0.1close8 Ω vs 4 Ω: amp load changes · Xmax 4.7 mm < 5.62 mm: lower excursion-limited SPL+
Faital PRO 10FE40060 =0.47 +0.0635.3 +1.75.42 -0.296 +1close8 Ω vs 4 Ω: amp load changes · Xmax 5.42 mm < 5.62 mm: lower excursion-limited SPL+
Jensen BS10N/25058 -20.438 +0.0330.9 -2.74.8 -0.8295 =close8 Ω vs 4 Ω: amp load changes · Xmax 4.8 mm < 5.62 mm: lower excursion-limited SPL+
Jensen BS10N/250A58 -20.438 +0.0330.9 -2.74.8 -0.8295 =close8 Ω vs 4 Ω: amp load changes · Xmax 4.8 mm < 5.62 mm: lower excursion-limited SPL+
SICA PL10B25S57.6 -2.40.438 +0.0330.9 -2.74.8 -0.8294.9 -0.1close8 Ω vs 4 Ω: amp load changes · Xmax 4.8 mm < 5.62 mm: lower excursion-limited SPL+
18 Sound 10W65064 +40.41 =27 -6.65.7 +0.0896 +1close16 Ω vs 4 Ω: amp load changes+
LaVoce WSF102.0065 +50.45 +0.0434.03 +0.435.2 -0.4297 +2close8 Ω vs 4 Ω: amp load changes · Xmax 5.2 mm < 5.62 mm: lower excursion-limited SPL+
LaVoce FBASS10-1865 +50.43 +0.0232.4 -1.24.5 -1.1296 +1close8 Ω vs 4 Ω: amp load changes · 150 W vs 200 W: lower power handling · Xmax 4.5 mm < 5.62 mm: lower excursion-limited SPL+

Compare the closest 3 against the 10FE400 →

Ranked on parameter similarity only (Qts, Fs, Vas, Xmax, sensitivity). Same nominal size required. A hint, not a simulation, model the swap before cutting or buying.

Used in enclosures (0)

No enclosure in the catalog uses this driver yet.