← all drivers

Faital PRO 10FE300

10" · 8 Ω · 250 W · 96 dB · datasheet ↗

Thiele-Small parameters

Nominal size10"
Impedance8 Ω
Fs50 Hz
Qts0.52
Qes0.54
Qms13.1
Vas50.5 L
Sd358 cm²
Xmax5.52 mm
Re5.8 Ω
Mms35.9 g
Pe250 W
Sensitivity96 dB

Alignment hint

EBP93 · flexible
Sealed Vb (Qtc ≈ 0.71)≈ 59.5 L

EBP 50-100: works in either a sealed or ported alignment.

Rules of thumb from T/S parameters only. Verify against a real simulation before cutting wood.

Substitute candidates

DriverFs (Hz)QtsVas (L)Xmax (mm)Sens (dB)FitNotesCompare
Eminence BETA1053 +30.489 -0.0360.1 +9.65 -0.5295.8 -0.2closeXmax 5 mm < 5.52 mm: lower excursion-limited SPL+
LaVoce NBASS10-20-1653 +30.54 +0.0242.15 -8.356.3 +0.7893 -3close16 Ω vs 8 Ω: amp load changes · 150 W vs 250 W: lower power handling+
Dayton Audio PA255-846.4 -3.60.484 -0.0459 +8.55 -0.5294.6 -1.4closeXmax 5 mm < 5.52 mm: lower excursion-limited SPL+
Eminence BASSLITE CA201051 +10.505 -0.0249 -1.53.5 -2.0294.6 -1.4usable150 W vs 250 W: lower power handling · Xmax 3.5 mm < 5.52 mm: lower excursion-limited SPL+
Faital PRO 10FE20055 +50.49 -0.0361 +10.54.62 -0.996 =usable4 Ω vs 8 Ω: amp load changes · 150 W vs 250 W: lower power handling · Xmax 4.62 mm < 5.52 mm: lower excursion-limited SPL+
Faital PRO 10FE200-455 +50.492 -0.0353 +2.54.6 -0.9298.5 +2.5usable4 Ω vs 8 Ω: amp load changes · 150 W vs 250 W: lower power handling · Xmax 4.6 mm < 5.52 mm: lower excursion-limited SPL+
STX W.25.300.8.MC51 +10.483 -0.0459 +8.54 -1.5295.2 -0.8usable150 W vs 250 W: lower power handling · Xmax 4 mm < 5.52 mm: lower excursion-limited SPL+
Faital PRO 10PR32050 =0.38 -0.1450.6 +0.17.27 +1.7595 -1usable16 Ω vs 8 Ω: amp load changes+
Faital PRO 10FE30050 =0.39 -0.1349 -1.55.47 -0.0594 -2usable4 Ω vs 8 Ω: amp load changes · Xmax 5.47 mm < 5.52 mm: lower excursion-limited SPL+
Beyma 10CM/V252 +20.42 -0.144 -6.56.5 +0.9895 -1usable+

Compare the closest 3 against the 10FE300 →

Ranked on parameter similarity only (Qts, Fs, Vas, Xmax, sensitivity). Same nominal size required. A hint, not a simulation, model the swap before cutting or buying.

Used in enclosures (0)

No enclosure in the catalog uses this driver yet.