Faital PRO 10FE300

10" · 4 Ω · 250 W · 94 dB · datasheet ↗

Thiele-Small parameters

Nominal size	10"
Impedance	4 Ω
Fs	50 Hz
Qts	0.39
Qes	0.41
Qms	10.8
Vas	49 L
Sd	358 cm²
Xmax	5.47 mm
Re	3.3 Ω
Mms	37 g
Pe	250 W
Sensitivity	94 dB

Alignment hint

EBP	122 · ported
Sealed Vb (Qtc ≈ 0.71)	≈ 21.4 L

EBP > 100: favours a ported (bass-reflex) alignment.

Rules of thumb from T/S parameters only. Verify against a real simulation before cutting wood.

Substitute candidates

Driver	Fs (Hz)	Qts	Vas (L)	Xmax (mm)	Sens (dB)	Fit	Notes	Compare
Faital PRO 10PR320	50 =	0.38 -0.01	50.6 +1.6	7.27 +1.8	95 +1	close	16 Ω vs 4 Ω: amp load changes	+
LaVoce NBASS10-20	52 +2	0.39 =	43.38 -5.62	6.6 +1.13	95.5 +1.5	close	8 Ω vs 4 Ω: amp load changes · 150 W vs 250 W: lower power handling	+
Beyma 10"WRS 300	52 +2	0.38 -0.01	42 -7	6 +0.53	95 +1	close	8 Ω vs 4 Ω: amp load changes	+
Faital PRO 10PR320 16 Ohms	50 =	0.38 -0.01	44.1 -4.9	6.6 +1.13	91.6 -2.4	close	16 Ω vs 4 Ω: amp load changes	+
Beyma 10CMV2	52 +2	0.418 +0.03	44 -5	5.2 -0.27	94.5 +0.5	close	8 Ω vs 4 Ω: amp load changes · Xmax 5.2 mm < 5.47 mm: lower excursion-limited SPL	+
Beyma 10CM/V2	52 +2	0.42 +0.03	44 -5	6.5 +1.03	95 +1	close	8 Ω vs 4 Ω: amp load changes	+
Eminence BETA 10CX	49 -1	0.38 -0.01	61.1 +12.1	5 -0.47	94.3 +0.3	close	8 Ω vs 4 Ω: amp load changes · Xmax 5 mm < 5.47 mm: lower excursion-limited SPL	+
Beyma 10CX300/FE	48 -2	0.38 -0.01	62.7 +13.7	6.75 +1.28	94.1 +0.1	close	8 Ω vs 4 Ω: amp load changes	+
Ciare FXE 10-2.5	46 -4	0.358 -0.03	41.6 -7.4	6 +0.53	93.6 -0.4	close	8 Ω vs 4 Ω: amp load changes	+
Beyma 10"WR300	52 +2	0.35 -0.04	42 -7	6 +0.53	95 +1	close	8 Ω vs 4 Ω: amp load changes	+

Compare the closest 3 against the 10FE300 →

Ranked on parameter similarity only (Qts, Fs, Vas, Xmax, sensitivity). Same nominal size required. A hint, not a simulation, model the swap before cutting or buying.

Used in enclosures (0)

No enclosure in the catalog uses this driver yet.