Faital PRO 10FE200

10" · 8 Ω · 150 W · 96 dB · datasheet ↗

Thiele-Small parameters

Nominal size	10"
Impedance	8 Ω
Fs	55 Hz
Qts	0.69
Qes	0.74
Qms	11.3
Vas	61.7 L
Sd	359.7 cm²
Xmax	4.67 mm
Re	5.9 Ω
Mms	24.5 g
Pe	150 W
Sensitivity	96 dB

Alignment hint

EBP	74 · flexible
Sealed Vb (Qtc ≈ 0.71)	≈ 1229.1 L

EBP 50-100: works in either a sealed or ported alignment.

Rules of thumb from T/S parameters only. Verify against a real simulation before cutting wood.

Substitute candidates

Driver	Fs (Hz)	Qts	Vas (L)	Xmax (mm)	Sens (dB)	Fit	Notes	Compare
Faital PRO 10FE200 v2014	55 =	0.695 +0.01	53.4 -8.3	4.7 +0.03	94.1 -1.9	close		+
Fane 10-125	55 =	0.638 -0.05	50.6 -11.1	4.7 +0.03	93.6 -2.4	close		+
Fane SOVEREIGN 10-125 v2	55 =	0.638 -0.05	50 -11.7	4.6 -0.07	93.5 -2.5	close	Xmax 4.6 mm < 4.67 mm: lower excursion-limited SPL	+
Ciare HX255 GR vp	55.3 +0.3	0.569 -0.12	57.4 -4.3	4 -0.67	95.4 -0.6	close	100 W vs 150 W: lower power handling · Xmax 4 mm < 4.67 mm: lower excursion-limited SPL	+
Faital PRO 10FE200	55 =	0.49 -0.2	61 -0.7	4.62 -0.05	96 =	usable	4 Ω vs 8 Ω: amp load changes · Xmax 4.62 mm < 4.67 mm: lower excursion-limited SPL	+
Eminence BETA10	53 -2	0.489 -0.2	60.1 -1.6	5 +0.33	95.8 -0.2	usable		+
Beyma PRO CM10	60 +5	0.594 -0.1	49.6 -12.1	4.2 -0.47	95.3 -0.7	usable	Xmax 4.2 mm < 4.67 mm: lower excursion-limited SPL	+
Eminence LEGEND B810	52.1 -2.9	0.648 -0.04	66.4 +4.7	4.7 +0.03	88 -8	usable	32 Ω vs 8 Ω: amp load changes	+
Focal 690 CVX	60.3 +5.3	0.693 =	59.5 -2.2	2.5 -2.17	97.8 +1.8	usable	4 Ω vs 8 Ω: amp load changes · 80 W vs 150 W: lower power handling · Xmax 2.5 mm < 4.67 mm: lower excursion-limited SPL	+
LaVoce NBASS10-20-32	57 +2	0.61 -0.08	44.44 -17.26	6.4 +1.73	94 -2	usable	32 Ω vs 8 Ω: amp load changes	+

Compare the closest 3 against the 10FE200 →

Ranked on parameter similarity only (Qts, Fs, Vas, Xmax, sensitivity). Same nominal size required. A hint, not a simulation, model the swap before cutting or buying.

Used in enclosures (0)

No enclosure in the catalog uses this driver yet.