EMS LB12EX_08V
Thiele-Small parameters
| Nominal size | 12" |
|---|---|
| Impedance | 16 Ω |
| Fs | 34 Hz |
| Qts | 0.414 |
| Qes | 0.442 |
| Qms | 6.62 |
| Vas | 200 L |
| Sd | 498.1 cm² |
| Xmax | 3 mm |
| Re | 11.7 Ω |
| Bl | 14.7 T·m |
| Mms | 38.1 g |
| Pe | 40 W |
| Sensitivity | 92.8 dB |
Alignment hint
| EBP | 77 · flexible |
|---|---|
| Sealed Vb (Qtc ≈ 0.71) | ≈ 104.3 L |
EBP 50-100: works in either a sealed or ported alignment.
Rules of thumb from T/S parameters only. Verify against a real simulation before cutting wood.
Substitute candidates
| Driver | Fs (Hz) | Qts | Vas (L) | Xmax (mm) | Sens (dB) | Fit | Notes | Compare |
|---|---|---|---|---|---|---|---|---|
| Davis 31ST12 v2018 | 34.1 +0.1 | 0.428 +0.01 | 195.7 -4.3 | 5 +2 | 93.9 +1.1 | close | 8 Ω vs 16 Ω: amp load changes | + |
| Beyma HP12 | 36 +2 | 0.401 -0.01 | 200 = | 4 +1 | 95.6 +2.8 | close | 8 Ω vs 16 Ω: amp load changes | + |
| Sonido SCW-300 | 35 +1 | 0.401 -0.01 | 210 +10 | 4.5 +1.5 | 95 +2.2 | close | 8 Ω vs 16 Ω: amp load changes | + |
| DAS Audio G-12 vp1 | 30.9 -3.1 | 0.389 -0.02 | 166.2 -33.8 | 3 = | 93.2 +0.4 | close | 8 Ω vs 16 Ω: amp load changes | + |
| Visaton W300-8 | 32 -2 | 0.449 +0.04 | 190 -10 | 7 +4 | 93.4 +0.6 | close | 8 Ω vs 16 Ω: amp load changes | + |
| Philips AD12250W8 vp doum1 | 29.5 -4.5 | 0.404 -0.01 | 216 +16 | 6 +3 | 93.2 +0.4 | close | 8 Ω vs 16 Ω: amp load changes | + |
| Philips AD12100W8 vp doum1 | 29.9 -4.1 | 0.413 = | 166 -34 | 6 +3 | 92.5 -0.3 | close | 8 Ω vs 16 Ω: amp load changes | + |
| Cabasse 30M20 | 34 = | 0.454 +0.04 | 220 +20 | 4.6 +1.6 | 96 +3.2 | close | 8 Ω vs 16 Ω: amp load changes | + |
| Philips AD12100/M8 | 36 +2 | 0.464 +0.05 | 193.3 -6.7 | 6.2 +3.2 | 94.6 +1.8 | close | 8 Ω vs 16 Ω: amp load changes | + |
| MCM Electronics 55-1255 | 35 +1 | 0.554 +0.14 | 197.6 -2.4 | 3.5 +0.5 | 93 +0.2 | usable | 8 Ω vs 16 Ω: amp load changes | + |
Compare the closest 3 against the LB12EX_08V →
Ranked on parameter similarity only (Qts, Fs, Vas, Xmax, sensitivity). Same nominal size required. A hint, not a simulation, model the swap before cutting or buying.
Used in enclosures (0)
No enclosure in the catalog uses this driver yet.