EMS B15EX
Thiele-Small parameters
| Nominal size | 15" |
|---|---|
| Impedance | 8 Ω |
| Fs | 22 Hz |
| Qts | 0.223 |
| Qes | 0.23 |
| Qms | 7.16 |
| Vas | 791 L |
| Sd | 855 cm² |
| Xmax | 7 mm |
| Re | 6.5 Ω |
| Bl | 16.3 T·m |
| Mms | 67.8 g |
| Pe | 100 W |
| Sensitivity | 98.5 dB |
Alignment hint
| EBP | 96 · flexible |
|---|---|
| Sealed Vb (Qtc ≈ 0.71) | ≈ 87.4 L |
EBP 50-100: works in either a sealed or ported alignment.
Rules of thumb from T/S parameters only. Verify against a real simulation before cutting wood.
Substitute candidates
| Driver | Fs (Hz) | Qts | Vas (L) | Xmax (mm) | Sens (dB) | Fit | Notes | Compare |
|---|---|---|---|---|---|---|---|---|
| EMS B15EX-07.5V | 22 = | 0.228 +0.01 | 791 = | 7 = | 98.4 -0.1 | close | + | |
| Focal AUDIOM 15A | 21.5 -0.5 | 0.223 = | 832 +41 | 6 -1 | 98.8 +0.3 | close | Xmax 6 mm < 7 mm: lower excursion-limited SPL | + |
| Supravox 400 GMF MK2 | 22 = | 0.206 -0.02 | 633 -158 | 7 = | 97.9 -0.6 | close | + | |
| Focal AUDIOM 15VX v2 | 18.4 -3.6 | 0.224 = | 727 -64 | 6 -1 | 96.1 -2.4 | usable | Xmax 6 mm < 7 mm: lower excursion-limited SPL | + |
| Altec 416-8C v2009 | 22.9 +0.9 | 0.213 -0.01 | 693.8 -97.2 | 3.8 -3.2 | 98.6 +0.1 | usable | Xmax 3.8 mm < 7 mm: lower excursion-limited SPL | + |
| Great Plains Audio 416-8C GPA | 22.9 +0.9 | 0.213 -0.01 | 693.8 -97.2 | 3.8 -3.2 | 98.6 +0.1 | usable | Xmax 3.8 mm < 7 mm: lower excursion-limited SPL | + |
| JBL 2215H | 20 -2 | 0.212 -0.01 | 736.2 -54.8 | 4.1 -2.9 | 97.7 -0.8 | usable | Xmax 4.1 mm < 7 mm: lower excursion-limited SPL | + |
| Usher Audio 1503HM | 21 -1 | 0.222 = | 528.8 -262.2 | 5.5 -1.5 | 97.2 -1.3 | usable | Xmax 5.5 mm < 7 mm: lower excursion-limited SPL | + |
| Fluxmag 1504B | 22.5 +0.5 | 0.224 = | 433.8 -357.2 | 7.3 +0.3 | 97 -1.5 | usable | + | |
| Audax HD35S66 | 18 -4 | 0.217 -0.01 | 735 -56 | 5 -2 | 96.4 -2.1 | usable | Xmax 5 mm < 7 mm: lower excursion-limited SPL | + |
Compare the closest 3 against the B15EX →
Ranked on parameter similarity only (Qts, Fs, Vas, Xmax, sensitivity). Same nominal size required. A hint, not a simulation, model the swap before cutting or buying.
Used in enclosures (0)
No enclosure in the catalog uses this driver yet.