Eminence RED FANG 16
Thiele-Small parameters
| Nominal size | 12" |
|---|---|
| Impedance | 16 Ω |
| Fs | 89 Hz |
| Qts | 0.971 |
| Qes | 1.09 |
| Qms | 8.93 |
| Vas | 50.2 L |
| Sd | 519.5 cm² |
| Xmax | 0.5 mm |
| Re | 11.4 Ω |
| Bl | 11.9 T·m |
| Mms | 24.1 g |
| Pe | 50 W |
| Sensitivity | 95.6 dB |
Alignment hint
| EBP | 82 · flexible |
|---|---|
| Sealed Vb (Qtc ≈ 0.71) | Qts too high |
EBP 50-100: works in either a sealed or ported alignment.
Rules of thumb from T/S parameters only. Verify against a real simulation before cutting wood.
Substitute candidates
| Driver | Fs (Hz) | Qts | Vas (L) | Xmax (mm) | Sens (dB) | Fit | Notes | Compare |
|---|---|---|---|---|---|---|---|---|
| Eminence LEGEND 1258 | 94 +5 | 0.99 +0.02 | 32.5 -17.7 | 0.5 = | 95.9 +0.3 | usable | 8 Ω vs 16 Ω: amp load changes | + |
| Celestion G12T 75 | 85 -4 | 0.836 -0.13 | 51 +0.8 | 2 +1.5 | 95.3 -0.3 | usable | + | |
| Eminence TF 1250 | 95 +6 | 0.879 -0.09 | 37.5 -12.7 | 0.5 = | 97.6 +2 | usable | 8 Ω vs 16 Ω: amp load changes | + |
| Jensen JCH 1270-8 | 78 -11 | 1.084 +0.11 | 46.7 -3.5 | 1.5 +1 | 96.6 +1 | usable | 8 Ω vs 16 Ω: amp load changes | + |
| Celestion G12T-100 | 81 -8 | 0.833 -0.14 | 47 -3.2 | 2 +1.5 | 96.8 +1.2 | usable | 8 Ω vs 16 Ω: amp load changes | + |
| Celestion F12M-150 Triple Cone | 69.4 -19.6 | 0.906 -0.06 | 46.9 -3.3 | 2.3 +1.8 | 95.2 -0.4 | usable | 8 Ω vs 16 Ω: amp load changes | + |
| Eminence LEGEND 1218 | 100 +11 | 0.895 -0.08 | 31.2 -19 | 0.8 +0.3 | 97.8 +2.2 | usable | 8 Ω vs 16 Ω: amp load changes | + |
| Jensen JP12-100BB | 95.1 +6.1 | 0.836 -0.13 | 34.4 -15.8 | 1 +0.5 | 98.2 +2.6 | usable | 8 Ω vs 16 Ω: amp load changes | + |
| Beyma 12GA50 | 90 +1 | 1.16 +0.19 | 34 -16.2 | 2 +1.5 | 94.8 -0.8 | usable | 8 Ω vs 16 Ω: amp load changes | + |
| Eminence CANNABIS REX 12 | 101 +12 | 0.758 -0.21 | 36.4 -13.8 | 0.8 +0.3 | 96.4 +0.8 | usable | + |
Compare the closest 3 against the RED FANG 16 →
Ranked on parameter similarity only (Qts, Fs, Vas, Xmax, sensitivity). Same nominal size required. A hint, not a simulation, model the swap before cutting or buying.
Used in enclosures (0)
No enclosure in the catalog uses this driver yet.