← all drivers

Eminence LEGEND BP102

10" · 8 Ω · 200 W · 92.7 dB · datasheet ↗

Thiele-Small parameters

Nominal size10"
Impedance8 Ω
Fs35 Hz
Qts0.432
Qes0.47
Qms5.36
Vas91.2 L
Sd334.5 cm²
Xmax6.2 mm
Re5.59 Ω
Bl9.6 T·m
Mms35.6 g
Pe200 W
Sensitivity92.7 dB

Alignment hint

EBP74 · flexible
Sealed Vb (Qtc ≈ 0.71)≈ 54.3 L

EBP 50-100: works in either a sealed or ported alignment.

Rules of thumb from T/S parameters only. Verify against a real simulation before cutting wood.

Substitute candidates

DriverFs (Hz)QtsVas (L)Xmax (mm)Sens (dB)FitNotesCompare
SICA Z00578031.7 -3.30.455 +0.0292.6 +1.48.9 +2.793.5 +0.8close4 Ω vs 8 Ω: amp load changes · 150 W vs 200 W: lower power handling+
Dayton Audio DS270-8 v201831.6 -3.40.441 +0.0187.7 -3.55.5 -0.790.8 -1.9close100 W vs 200 W: lower power handling · Xmax 5.5 mm < 6.2 mm: lower excursion-limited SPL+
JBL LE10A30 -50.41 -0.02101.9 +10.76.1 -0.192.5 -0.2close60 W vs 200 W: lower power handling · Xmax 6.1 mm < 6.2 mm: lower excursion-limited SPL+
HiVi W1035 =0.368 -0.0681.4 -9.86.2 =91.8 -0.9close150 W vs 200 W: lower power handling+
Celestion PULSE XL 10.20-837.5 +2.50.459 +0.0376.9 -14.38.3 +2.192.5 -0.2close+
Carpower SP-252C35 =0.409 -0.0296 +4.85 -1.294.8 +2.1close4 Ω vs 8 Ω: amp load changes · 100 W vs 200 W: lower power handling · Xmax 5 mm < 6.2 mm: lower excursion-limited SPL+
Monacor SP-250C35 =0.409 -0.0296 +4.85 -1.294.8 +2.1close4 Ω vs 8 Ω: amp load changes · 100 W vs 200 W: lower power handling · Xmax 5 mm < 6.2 mm: lower excursion-limited SPL+
Davis 25GC10R37.2 +2.20.397 -0.0380.9 -10.35.7 -0.593.5 +0.8close100 W vs 200 W: lower power handling · Xmax 5.7 mm < 6.2 mm: lower excursion-limited SPL+
Faital PRO 10FE33035 =0.4 -0.0372.4 -18.88.32 +2.1292 -0.7close+
SICA 10 SR 2 PL Z00600433.6 -1.40.423 -0.0166.5 -24.76.5 +0.393.3 +0.6close4 Ω vs 8 Ω: amp load changes · 150 W vs 200 W: lower power handling+

Compare the closest 3 against the LEGEND BP102 →

Ranked on parameter similarity only (Qts, Fs, Vas, Xmax, sensitivity). Same nominal size required. A hint, not a simulation, model the swap before cutting or buying.

Used in enclosures (0)

No enclosure in the catalog uses this driver yet.