← all drivers

Eminence LEGEND BP102 4 Ohms

10" · 4 Ω · 200 W · 97 dB · datasheet ↗

Thiele-Small parameters

Nominal size10"
Impedance4 Ω
Fs34.5 Hz
Qts0.385
Qes0.4
Qms10.61
Vas103.8 L
Sd344.9 cm²
Xmax6.2 mm
Re2.7 Ω
Bl7.1 T·m
Mms34.1 g
Pe200 W
Sensitivity97 dB

Alignment hint

EBP86 · flexible
Sealed Vb (Qtc ≈ 0.71)≈ 43.7 L

EBP 50-100: works in either a sealed or ported alignment.

Rules of thumb from T/S parameters only. Verify against a real simulation before cutting wood.

Substitute candidates

DriverFs (Hz)QtsVas (L)Xmax (mm)Sens (dB)FitNotesCompare
Volt B25031.7 -2.80.377 -0.01104 +0.26 -0.292.8 -4.2close8 Ω vs 4 Ω: amp load changes · Xmax 6 mm < 6.2 mm: lower excursion-limited SPL+
Focal 10V 641132.9 -1.60.378 -0.01116.9 +13.17 +0.893.4 -3.6close8 Ω vs 4 Ω: amp load changes · 150 W vs 200 W: lower power handling+
Carpower SP-252C35 +0.50.409 +0.0296 -7.85 -1.294.8 -2.2close100 W vs 200 W: lower power handling · Xmax 5 mm < 6.2 mm: lower excursion-limited SPL+
Monacor SP-250C35 +0.50.409 +0.0296 -7.85 -1.294.8 -2.2close100 W vs 200 W: lower power handling · Xmax 5 mm < 6.2 mm: lower excursion-limited SPL+
Visaton W250S-433 -1.50.354 -0.03135 +31.27 +0.896 -1usable100 W vs 200 W: lower power handling+
JBL LE10A30 -4.50.41 +0.02101.9 -1.96.1 -0.192.5 -4.5usable8 Ω vs 4 Ω: amp load changes · 60 W vs 200 W: lower power handling · Xmax 6.1 mm < 6.2 mm: lower excursion-limited SPL+
Sony XS-L100C28.1 -6.40.362 -0.02104 +0.26.3 +0.193.4 -3.6usable150 W vs 200 W: lower power handling+
Eminence LEGEND BP10235 +0.50.432 +0.0591.2 -12.66.2 =92.7 -4.3usable8 Ω vs 4 Ω: amp load changes+
Focal 11C 72630.9 -3.60.378 -0.01120 +16.26.9 +0.792.4 -4.6usable8 Ω vs 4 Ω: amp load changes · 100 W vs 200 W: lower power handling+
HiVi W1035 +0.50.368 -0.0281.4 -22.46.2 =91.8 -5.2usable8 Ω vs 4 Ω: amp load changes · 150 W vs 200 W: lower power handling+

Compare the closest 3 against the LEGEND BP102 4 Ohms →

Ranked on parameter similarity only (Qts, Fs, Vas, Xmax, sensitivity). Same nominal size required. A hint, not a simulation, model the swap before cutting or buying.

Used in enclosures (0)

No enclosure in the catalog uses this driver yet.