Eminence LEGEND B102
Thiele-Small parameters
| Nominal size | 10" |
|---|---|
| Impedance | 8 Ω |
| Fs | 48 Hz |
| Qts | 0.389 |
| Qes | 0.42 |
| Qms | 5.31 |
| Vas | 65 L |
| Sd | 344.9 cm² |
| Xmax | 3 mm |
| Re | 6.89 Ω |
| Bl | 11.8 T·m |
| Mms | 28.2 g |
| Pe | 200 W |
| Sensitivity | 95 dB |
Alignment hint
| EBP | 114 · ported |
|---|---|
| Sealed Vb (Qtc ≈ 0.71) | ≈ 28.2 L |
EBP > 100: favours a ported (bass-reflex) alignment.
Rules of thumb from T/S parameters only. Verify against a real simulation before cutting wood.
Substitute candidates
| Driver | Fs (Hz) | Qts | Vas (L) | Xmax (mm) | Sens (dB) | Fit | Notes | Compare |
|---|---|---|---|---|---|---|---|---|
| Eminence BETA 10CX-8 | 48 = | 0.397 +0.01 | 64.2 -0.8 | 5 +2 | 95.8 +0.8 | close | + | |
| Eminence BETA 10CX | 49 +1 | 0.397 +0.01 | 64.2 -0.8 | 5 +2 | 96 +1 | close | + | |
| Eminence BETA 10CX | 49 +1 | 0.38 -0.01 | 61.1 -3.9 | 5 +2 | 94.3 -0.7 | close | + | |
| Beyma 10CX300/FE | 48 = | 0.38 -0.01 | 62.7 -2.3 | 6.75 +3.75 | 94.1 -0.9 | close | + | |
| P.Audio HP-10W | 48.43 +0.43 | 0.4 +0.01 | 55.35 -9.65 | 3 = | 93.4 -1.6 | close | + | |
| Beyma SM110/N | 43 -5 | 0.353 -0.04 | 65 = | 4 +1 | 94.5 -0.5 | close | + | |
| Zeuz 10 400 HC | 43.1 -4.9 | 0.367 -0.02 | 66.1 +1.1 | 2.5 -0.5 | 94.1 -0.9 | close | Xmax 2.5 mm < 3 mm: lower excursion-limited SPL | + |
| Beyma 10CX25 | 53 +5 | 0.366 -0.02 | 66 +1 | 5 +2 | 97.1 +2.1 | close | + | |
| Beyma SM110 | 42 -6 | 0.345 -0.04 | 65 = | 4 +1 | 93.6 -1.4 | close | + | |
| Faital PRO 10PR320 | 50 +2 | 0.38 -0.01 | 50.6 -14.4 | 7.27 +4.27 | 95 = | close | 16 Ω vs 8 Ω: amp load changes | + |
Compare the closest 3 against the LEGEND B102 →
Ranked on parameter similarity only (Qts, Fs, Vas, Xmax, sensitivity). Same nominal size required. A hint, not a simulation, model the swap before cutting or buying.
Used in enclosures (0)
No enclosure in the catalog uses this driver yet.