← all drivers

Eminence LAB 12

12" · 8 Ω · 400 W · 90 dB · datasheet ↗

Thiele-Small parameters

Nominal size12"
Impedance8 Ω
Fs22 Hz
Qts0.379
Qes0.39
Qms13.32
Vas125.2 L
Sd506.7 cm²
Xmax11 mm
Re4.29 Ω
Bl15.1 T·m
Mms150.4 g
Pe400 W
Sensitivity90 dB

Alignment hint

EBP56 · flexible
Sealed Vb (Qtc ≈ 0.71)≈ 50.5 L

EBP 50-100: works in either a sealed or ported alignment.

Rules of thumb from T/S parameters only. Verify against a real simulation before cutting wood.

Substitute candidates

DriverFs (Hz)QtsVas (L)Xmax (mm)Sens (dB)FitNotesCompare
Eminence LAB 12 |22 =0.38 =125.2 =13 +289.2 -0.8close6 Ω vs 8 Ω: amp load changes+
Kenwood XR-W120421.5 -0.50.341 -0.04125.386 +0.1910.8 -0.287.3 -2.7close4 Ω vs 8 Ω: amp load changes · Xmax 10.8 mm < 11 mm: lower excursion-limited SPL+
Eminence LAB 12C23 +10.33 -0.05128.31 +3.1113 +288.9 -1.1close4 Ω vs 8 Ω: amp load changes+
Infinity KAPPA 120.1SE22.5 +0.50.359 -0.02146.5 +21.311.2 +0.292.4 +2.4close4 Ω vs 8 Ω: amp load changes · 300 W vs 400 W: lower power handling+
Dayton Audio DCS305-422.9 +0.90.408 +0.03116.6 -8.69.3 -1.791 +1close4 Ω vs 8 Ω: amp load changes · 250 W vs 400 W: lower power handling · Xmax 9.3 mm < 11 mm: lower excursion-limited SPL+
Dayton Audio DSC305-423 +10.408 +0.03116 -9.29.3 -1.791 +1close4 Ω vs 8 Ω: amp load changes · 250 W vs 400 W: lower power handling · Xmax 9.3 mm < 11 mm: lower excursion-limited SPL+
Eminence LAB 12 C22.9 +0.90.33 -0.05128.3 +3.111 =92.6 +2.6close4 Ω vs 8 Ω: amp load changes+
Peerless 308SWR51XXLSP (830847)21.8 -0.20.357 -0.02144.2 +1910.8 -0.293.1 +3.1close4 Ω vs 8 Ω: amp load changes · 220 W vs 400 W: lower power handling · Xmax 10.8 mm < 11 mm: lower excursion-limited SPL+
Visaton TIW360X21 -10.336 -0.04140 +14.812.2 +1.288.8 -1.2close300 W vs 400 W: lower power handling+
Adire Audio SHIVA MK II - DVC Parall&egrave;le22 =0.385 +0.01158 +32.814.1 +3.192.7 +2.7close4 Ω vs 8 Ω: amp load changes+

Compare the closest 3 against the LAB 12 →

Ranked on parameter similarity only (Qts, Fs, Vas, Xmax, sensitivity). Same nominal size required. A hint, not a simulation, model the swap before cutting or buying.

Used in enclosures (0)

No enclosure in the catalog uses this driver yet.