Eminence KL3012CX-8
Thiele-Small parameters
| Nominal size | 12" |
|---|---|
| Impedance | 8 Ω |
| Fs | 42 Hz |
| Qts | 0.299 |
| Qes | 0.31 |
| Qms | 8.37 |
| Vas | 111.5 L |
| Sd | 545.4 cm² |
| Xmax | 3.7 mm |
| Re | 5.7 Ω |
| Bl | 16.1 T·m |
| Mms | 53.7 g |
| Pe | 400 W |
| Sensitivity | 97.7 dB |
Alignment hint
| EBP | 135 · ported |
|---|---|
| Sealed Vb (Qtc ≈ 0.71) | ≈ 24.3 L |
EBP > 100: favours a ported (bass-reflex) alignment.
Rules of thumb from T/S parameters only. Verify against a real simulation before cutting wood.
Substitute candidates
| Driver | Fs (Hz) | Qts | Vas (L) | Xmax (mm) | Sens (dB) | Fit | Notes | Compare |
|---|---|---|---|---|---|---|---|---|
| Supravox 285 GMF vp richard | 40 -2 | 0.298 = | 108 -3.5 | 3.7 = | 97.1 -0.6 | close | 70 W vs 400 W: lower power handling | + |
| Selenium 12PW5 | 43 +1 | 0.314 +0.02 | 108 -3.5 | 3.7 = | 97.5 -0.2 | close | 300 W vs 400 W: lower power handling | + |
| PHL Audio 4510 | 42 = | 0.307 +0.01 | 108 -3.5 | 6 +2.3 | 97.3 -0.4 | close | 300 W vs 400 W: lower power handling | + |
| PHL Audio 4550 | 45 +3 | 0.289 -0.01 | 106 -5.5 | 4 +0.3 | 98.3 +0.6 | close | 250 W vs 400 W: lower power handling | + |
| Beyma SM112-N2 | 40 -2 | 0.298 = | 117.3 +5.8 | 5.9 +2.2 | 96.9 -0.8 | close | 250 W vs 400 W: lower power handling | + |
| Fane SOVEREIGN PRO 12-500 | 43 +1 | 0.314 +0.02 | 107 -4.5 | 6 +2.3 | 97.4 -0.3 | close | + | |
| Monacor SP-12/200PA | 45 +3 | 0.328 +0.03 | 114 +2.5 | 4 +0.3 | 97.4 -0.3 | close | 200 W vs 400 W: lower power handling | + |
| Beyma SM112/N v2021 | 40 -2 | 0.298 = | 117 +5.5 | 7 +3.3 | 96.9 -0.8 | close | + | |
| PHL Audio 4500 | 42 = | 0.274 -0.02 | 108 -3.5 | 5.7 +2 | 99 +1.3 | close | 300 W vs 400 W: lower power handling | + |
| Beyma 12G125 | 41 -1 | 0.269 -0.03 | 122 +10.5 | 4 +0.3 | 97.2 -0.5 | close | 125 W vs 400 W: lower power handling | + |
Compare the closest 3 against the KL3012CX-8 →
Ranked on parameter similarity only (Qts, Fs, Vas, Xmax, sensitivity). Same nominal size required. A hint, not a simulation, model the swap before cutting or buying.
Used in enclosures (0)
No enclosure in the catalog uses this driver yet.