← all drivers

Eminence KAPPALITE 3010 MB

10" · 8 Ω · 400 W · 99.1 dB · datasheet ↗

Thiele-Small parameters

Nominal size10"
Impedance8 Ω
Fs50.7 Hz
Qts0.204
Qes0.21
Qms6.83
Vas52.1 L
Sd366.1 cm²
Xmax5 mm
Re5.01 Ω
Bl16.4 T·m
Mms35.6 g
Pe400 W
Sensitivity99.1 dB

Alignment hint

EBP241 · ported
Sealed Vb (Qtc ≈ 0.71)≈ 4.7 L

EBP > 100: favours a ported (bass-reflex) alignment.

Rules of thumb from T/S parameters only. Verify against a real simulation before cutting wood.

Substitute candidates

DriverFs (Hz)QtsVas (L)Xmax (mm)Sens (dB)FitNotesCompare
Beyma 10"MI10050 -0.70.21 +0.0154 +1.94.5 -0.598 -1.1closeXmax 4.5 mm < 5 mm: lower excursion-limited SPL+
Beyma 10MI100 v201750 -0.70.213 +0.0154 +1.94.5 -0.597.9 -1.2closeXmax 4.5 mm < 5 mm: lower excursion-limited SPL+
Faital PRO 10PR30050 -0.70.24 +0.0449.8 -2.34.92 -0.0896 -3.1close4 Ω vs 8 Ω: amp load changes · 300 W vs 400 W: lower power handling · Xmax 4.92 mm < 5 mm: lower excursion-limited SPL+
Beyma 10M25050 -0.70.214 +0.0164 +11.93.5 -1.599 -0.1usable250 W vs 400 W: lower power handling · Xmax 3.5 mm < 5 mm: lower excursion-limited SPL+
Eminence Kappa Pro-10A46 -4.70.2 =52.2 +0.13.2 -1.897 -2.1usableXmax 3.2 mm < 5 mm: lower excursion-limited SPL+
Dayton Audio APOLLO 10N54 +3.30.222 +0.0243.5 -8.64.3 -0.797.1 -2usable250 W vs 400 W: lower power handling · Xmax 4.3 mm < 5 mm: lower excursion-limited SPL+
Eminence KAPPA PRO 1046 -4.70.196 -0.0152.2 +0.13.2 -1.896.9 -2.2usableXmax 3.2 mm < 5 mm: lower excursion-limited SPL+
Eminence KAPPA PRO 10 A46 -4.70.196 -0.0152.2 +0.13.2 -1.896.9 -2.2usableXmax 3.2 mm < 5 mm: lower excursion-limited SPL+
David Eden EC1060XL849.6 -1.10.207 =55.5 +3.42.4 -2.698.8 -0.3usable150 W vs 400 W: lower power handling · Xmax 2.4 mm < 5 mm: lower excursion-limited SPL+
SICA 10 FE 2.5 CP 4 Ohms51 +0.30.301 +0.147.7 -4.45.7 +0.799.1 =usable4 Ω vs 8 Ω: amp load changes · 300 W vs 400 W: lower power handling+

Compare the closest 3 against the KAPPALITE 3010 MB →

Ranked on parameter similarity only (Qts, Fs, Vas, Xmax, sensitivity). Same nominal size required. A hint, not a simulation, model the swap before cutting or buying.

Used in enclosures (0)

No enclosure in the catalog uses this driver yet.