Eminence KAPPA PRO 15 A
Thiele-Small parameters
| Nominal size | 15" |
|---|---|
| Impedance | 8 Ω |
| Fs | 47 Hz |
| Qts | 0.381 |
| Qes | 0.4 |
| Qms | 8.01 |
| Vas | 167.7 L |
| Sd | 856.3 cm² |
| Xmax | 6.4 mm |
| Re | 5.23 Ω |
| Bl | 16.5 T·m |
| Mms | 70.3 g |
| Pe | 500 W |
| Sensitivity | 100.2 dB |
Alignment hint
| EBP | 118 · ported |
|---|---|
| Sealed Vb (Qtc ≈ 0.71) | ≈ 68.6 L |
EBP > 100: favours a ported (bass-reflex) alignment.
Rules of thumb from T/S parameters only. Verify against a real simulation before cutting wood.
Substitute candidates
| Driver | Fs (Hz) | Qts | Vas (L) | Xmax (mm) | Sens (dB) | Fit | Notes | Compare |
|---|---|---|---|---|---|---|---|---|
| Eminence KAPPA PRO 15 | 47 = | 0.381 = | 167.7 = | 6.4 = | 100.2 = | close | + | |
| Beyma 15MW/ND v2019 | 42 -5 | 0.38 = | 176 +8.3 | 6.3 -0.1 | 99.2 -1 | close | Xmax 6.3 mm < 6.4 mm: lower excursion-limited SPL | + |
| Peavey 1505-8 DT | 46.5 -0.5 | 0.389 +0.01 | 164.3 -3.4 | 5.1 -1.3 | 99.5 -0.7 | close | 350 W vs 500 W: lower power handling · Xmax 5.1 mm < 6.4 mm: lower excursion-limited SPL | + |
| Peavey 1505-8BW | 46.5 -0.5 | 0.389 +0.01 | 164.3 -3.4 | 5.1 -1.3 | 99.5 -0.7 | close | 350 W vs 500 W: lower power handling · Xmax 5.1 mm < 6.4 mm: lower excursion-limited SPL | + |
| Eminence KAPPA PRO 15 LF | 46 -1 | 0.373 -0.01 | 142.2 -25.5 | 6.7 +0.3 | 98.9 -1.3 | close | + | |
| 18 Sound 15ND840 | 43 -4 | 0.37 -0.01 | 163 -4.7 | 9.5 +3.1 | 99 -1.2 | close | + | |
| Eminence KAPPALITE 3015 LF | 42 -5 | 0.387 +0.01 | 158.8 -8.9 | 6.4 = | 98.3 -1.9 | close | + | |
| SICA 15 S 3 PL 4 Ohms | 38.4 -8.6 | 0.373 -0.01 | 163.5 -4.2 | 6.5 +0.1 | 99.9 -0.3 | close | 4 Ω vs 8 Ω: amp load changes | + |
| Sica 15 N 3 PL | 46.9 -0.1 | 0.37 -0.01 | 140.4 -27.3 | 10 +3.6 | 99.8 -0.4 | close | + | |
| Eminence 15-3008PS | 47.9 +0.9 | 0.379 = | 203.6 +35.9 | 5.5 -0.9 | 100.2 = | close | Xmax 5.5 mm < 6.4 mm: lower excursion-limited SPL | + |
Compare the closest 3 against the KAPPA PRO 15 A →
Ranked on parameter similarity only (Qts, Fs, Vas, Xmax, sensitivity). Same nominal size required. A hint, not a simulation, model the swap before cutting or buying.
Used in enclosures (0)
No enclosure in the catalog uses this driver yet.