Eminence KAPPA PRO 10

10" · 8 Ω · 500 W · 96.9 dB · datasheet ↗

Thiele-Small parameters

Nominal size	10"
Impedance	8 Ω
Fs	46 Hz
Qts	0.196
Qes	0.2
Qms	10.1
Vas	52.2 L
Sd	344.9 cm²
Xmax	3.2 mm
Re	6.5 Ω
Bl	19 T·m
Mms	38.2 g
Pe	500 W
Sensitivity	96.9 dB

Alignment hint

EBP	230 · ported
Sealed Vb (Qtc ≈ 0.71)	≈ 4.3 L

EBP > 100: favours a ported (bass-reflex) alignment.

Rules of thumb from T/S parameters only. Verify against a real simulation before cutting wood.

Substitute candidates

Driver	Fs (Hz)	Qts	Vas (L)	Xmax (mm)	Sens (dB)	Fit	Notes	Compare
Eminence KAPPA PRO 10 A	46 =	0.196 =	52.2 =	3.2 =	96.9 =	close		+
Eminence Kappa Pro-10A	46 =	0.2 =	52.2 =	3.2 =	97 +0.1	close		+
Beyma 10"MI100	50 +4	0.21 +0.01	54 +1.8	4.5 +1.3	98 +1.1	close	350 W vs 500 W: lower power handling	+
Beyma 10MI100 v2017	50 +4	0.213 +0.02	54 +1.8	4.5 +1.3	97.9 +1	close	350 W vs 500 W: lower power handling	+
Eminence KAPPALITE 3010 MB	50.7 +4.7	0.204 +0.01	52.1 -0.1	5 +1.8	99.1 +2.2	close		+
Warehouse Sound WGS 12L	49.6 +3.6	0.242 +0.05	50.5 -1.7	3.3 +0.1	97.3 +0.4	close	200 W vs 500 W: lower power handling	+
David Eden EC1060XL8	49.6 +3.6	0.207 +0.01	55.5 +3.3	2.4 -0.8	98.8 +1.9	usable	150 W vs 500 W: lower power handling · Xmax 2.4 mm < 3.2 mm: lower excursion-limited SPL	+
Beyma 10G200	45 -1	0.251 +0.05	56.1 +3.9	4.5 +1.3	96.2 -0.7	usable	200 W vs 500 W: lower power handling	+
Beyma 10M250	50 +4	0.214 +0.02	64 +11.8	3.5 +0.3	99 +2.1	usable	250 W vs 500 W: lower power handling	+
Faital PRO 10PR300	50 +4	0.24 +0.04	49.8 -2.4	4.92 +1.72	96 -0.9	usable	4 Ω vs 8 Ω: amp load changes · 300 W vs 500 W: lower power handling	+

Compare the closest 3 against the KAPPA PRO 10 →

Ranked on parameter similarity only (Qts, Fs, Vas, Xmax, sensitivity). Same nominal size required. A hint, not a simulation, model the swap before cutting or buying.

Used in enclosures (0)

No enclosure in the catalog uses this driver yet.