Eminence KAPPA 18 A
Thiele-Small parameters
| Nominal size | 18" |
|---|---|
| Impedance | 8 Ω |
| Fs | 28 Hz |
| Qts | 0.408 |
| Qes | 0.43 |
| Qms | 7.84 |
| Vas | 475.5 L |
| Sd | 1140.1 cm² |
| Xmax | 4.8 mm |
| Re | 7.82 Ω |
| Bl | 19.9 T·m |
| Mms | 123.8 g |
| Pe | 500 W |
| Sensitivity | 95.9 dB |
Alignment hint
| EBP | 65 · flexible |
|---|---|
| Sealed Vb (Qtc ≈ 0.71) | ≈ 237.3 L |
EBP 50-100: works in either a sealed or ported alignment.
Rules of thumb from T/S parameters only. Verify against a real simulation before cutting wood.
Substitute candidates
| Driver | Fs (Hz) | Qts | Vas (L) | Xmax (mm) | Sens (dB) | Fit | Notes | Compare |
|---|---|---|---|---|---|---|---|---|
| Dibeisi PS1805-8 | 27.1 -0.9 | 0.4 -0.01 | 473.8 -1.7 | 7 +2.2 | 96.1 +0.2 | close | 250 W vs 500 W: lower power handling | + |
| Beyma SM118 | 30 +2 | 0.421 +0.01 | 430 -45.5 | 5.5 +0.7 | 97.2 +1.3 | close | + | |
| Fane 18-500 TLHP | 29 +1 | 0.403 = | 521 +45.5 | 6.3 +1.5 | 98.2 +2.3 | close | + | |
| Mach 5 Audio MAC MAH CWA46 | 27 -1 | 0.448 +0.04 | 470.3 -5.2 | 10 +5.2 | 96.2 +0.3 | close | + | |
| McCauley 6260-8 | 28 = | 0.379 -0.03 | 391 -84.5 | 8 +3.2 | 96.7 +0.8 | close | + | |
| Celestion G18-200 | 29.6 +1.6 | 0.364 -0.04 | 518.5 +43 | 5 +0.2 | 97.9 +2 | close | 200 W vs 500 W: lower power handling | + |
| Monacor SPA-45PA | 29 +1 | 0.457 +0.05 | 440 -35.5 | 4 -0.8 | 96.5 +0.6 | close | 300 W vs 500 W: lower power handling · Xmax 4 mm < 4.8 mm: lower excursion-limited SPL | + |
| Beyma 18LX60 | 27 -1 | 0.368 -0.04 | 500 +24.5 | 9 +4.2 | 97.7 +1.8 | close | + | |
| TAD TL-1801 | 26 -2 | 0.372 -0.04 | 500 +24.5 | 3.8 -1 | 96.3 +0.4 | close | 200 W vs 500 W: lower power handling · Xmax 3.8 mm < 4.8 mm: lower excursion-limited SPL | + |
| SB Audience BIANCO-18SW450 v2020 | 27 -1 | 0.375 -0.03 | 423 -52.5 | 9 +4.2 | 97.2 +1.3 | close | + |
Compare the closest 3 against the KAPPA 18 A →
Ranked on parameter similarity only (Qts, Fs, Vas, Xmax, sensitivity). Same nominal size required. A hint, not a simulation, model the swap before cutting or buying.
Used in enclosures (0)
No enclosure in the catalog uses this driver yet.