Eminence HL 10

10" · 8 Ω · 300 W · 88.9 dB · datasheet ↗

Thiele-Small parameters

Nominal size	10"
Impedance	8 Ω
Fs	32 Hz
Qts	0.282
Qes	0.29
Qms	9.9
Vas	29.2 L
Sd	334.5 cm²
Xmax	5.7 mm
Re	5.36 Ω
Bl	22.2 T·m
Mms	132.9 g
Pe	300 W
Sensitivity	88.9 dB

Alignment hint

EBP	110 · ported
Sealed Vb (Qtc ≈ 0.71)	≈ 5.5 L

EBP > 100: favours a ported (bass-reflex) alignment.

Rules of thumb from T/S parameters only. Verify against a real simulation before cutting wood.

Substitute candidates

Driver	Fs (Hz)	Qts	Vas (L)	Xmax (mm)	Sens (dB)	Fit	Notes	Compare
Pioneer TS-W252PRS	29 -3	0.282 =	30.1 +0.9	7 +1.3	91.1 +2.2	close	4 Ω vs 8 Ω: amp load changes	+
Max Speaker CA-1060/4	34 +2	0.307 +0.03	28.4 -0.8	6.1 +0.4	92 +3.1	close	4 Ω vs 8 Ω: amp load changes	+
Dayton Audio TS280D-4 TITANIC MK 4	29.6 -2.4	0.37 +0.09	27.8 -1.4	6.4 +0.7	88.4 -0.5	usable	4 Ω vs 8 Ω: amp load changes	+
Mivoc AWM 104	31 -1	0.26 -0.02	37 +7.8	5.2 -0.5	92.2 +3.3	usable	4 Ω vs 8 Ω: amp load changes · 220 W vs 300 W: lower power handling · Xmax 5.2 mm < 5.7 mm: lower excursion-limited SPL	+
SEAS L26RO4Y-XM004-04 v2018	26 -6	0.27 -0.01	40 +10.8	6.3 +0.6	89.4 +0.5	usable	4 Ω vs 8 Ω: amp load changes	+
Phase Linear SX 10	35 +3	0.327 +0.05	35 +5.8	5.9 +0.2	92.7 +3.8	usable	4 Ω vs 8 Ω: amp load changes	+
Pioneer TS-W255C	35 +3	0.351 +0.07	24.9 -4.3	6.6 +0.9	91 +2.1	usable	4 Ω vs 8 Ω: amp load changes	+
Faital PRO 10RS430 vp B184423	36.3 +4.3	0.293 +0.01	43 +13.8	7 +1.3	91 +2.1	usable		+
Dayton Audio RSS265HO-4 v2015	26.9 -5.1	0.356 +0.07	29.4 +0.2	9.3 +3.6	87.2 -1.7	usable	4 Ω vs 8 Ω: amp load changes	+
Kartesian SUB250_VHE	28 -4	0.355 +0.07	36.4 +7.2	5.5 -0.2	88.2 -0.7	usable	Xmax 5.5 mm < 5.7 mm: lower excursion-limited SPL	+

Compare the closest 3 against the HL 10 →

Ranked on parameter similarity only (Qts, Fs, Vas, Xmax, sensitivity). Same nominal size required. A hint, not a simulation, model the swap before cutting or buying.

Used in enclosures (0)

No enclosure in the catalog uses this driver yet.