Eminence GAMMA 12
Thiele-Small parameters
| Nominal size | 12" |
|---|---|
| Impedance | 8 Ω |
| Fs | 57 Hz |
| Qts | 0.676 |
| Qes | 0.75 |
| Qms | 6.86 |
| Vas | 74.1 L |
| Sd | 506.7 cm² |
| Xmax | 1.6 mm |
| Re | 6.52 Ω |
| Bl | 10.9 T·m |
| Mms | 37.9 g |
| Pe | 300 W |
| Sensitivity | 95.5 dB |
Alignment hint
| EBP | 76 · flexible |
|---|---|
| Sealed Vb (Qtc ≈ 0.71) | ≈ 787 L |
EBP 50-100: works in either a sealed or ported alignment.
Rules of thumb from T/S parameters only. Verify against a real simulation before cutting wood.
Substitute candidates
| Driver | Fs (Hz) | Qts | Vas (L) | Xmax (mm) | Sens (dB) | Fit | Notes | Compare |
|---|---|---|---|---|---|---|---|---|
| Eminence GAMMA 12 A | 57 = | 0.676 = | 74.1 = | 1.6 = | 95.5 = | close | + | |
| Supravox T285HF64 | 55 -2 | 0.6 -0.08 | 74.6 +0.5 | 3.3 +1.7 | 95.6 +0.1 | close | 70 W vs 300 W: lower power handling | + |
| Beyma 12AG | 60 +3 | 0.709 +0.03 | 92 +17.9 | 1.5 -0.1 | 96.3 +0.8 | close | 80 W vs 300 W: lower power handling · Xmax 1.5 mm < 1.6 mm: lower excursion-limited SPL | + |
| Peavey S-12825 | 59.4 +2.4 | 0.611 -0.07 | 66.6 -7.5 | 2.5 +0.9 | 96.8 +1.3 | close | 200 W vs 300 W: lower power handling | + |
| Fane 12-250TC SOVEREIGN | 50 -7 | 0.658 -0.02 | 78.1 +4 | 3.5 +1.9 | 93.8 -1.7 | close | + | |
| Fane SOVEREIGN 12-250TC | 50 -7 | 0.658 -0.02 | 78.1 +4 | 3.5 +1.9 | 93.8 -1.7 | close | + | |
| Faital PRO 12PR310 | 55 -2 | 0.67 -0.01 | 65.1 -9 | 4.92 +3.32 | 98 +2.5 | usable | 16 Ω vs 8 Ω: amp load changes | + |
| Mercuriale PTR 306 M0 | 58 +1 | 0.808 +0.13 | 70.1 -4 | 3.9 +2.3 | 94.6 -0.9 | usable | 150 W vs 300 W: lower power handling | + |
| B&C 12 CLX 64 | 54 -3 | 0.575 -0.1 | 74 -0.1 | 5.3 +3.7 | 96.3 +0.8 | usable | + | |
| SICA 12 D 1.5 CS 8 Ohms | 62 +5 | 0.748 +0.07 | 63.5 -10.6 | 2.7 +1.1 | 96.8 +1.3 | usable | 100 W vs 300 W: lower power handling | + |
Compare the closest 3 against the GAMMA 12 →
Ranked on parameter similarity only (Qts, Fs, Vas, Xmax, sensitivity). Same nominal size required. A hint, not a simulation, model the swap before cutting or buying.
Used in enclosures (0)
No enclosure in the catalog uses this driver yet.