Eminence GAMMA 10
Thiele-Small parameters
| Nominal size | 10" |
|---|---|
| Impedance | 8 Ω |
| Fs | 63 Hz |
| Qts | 0.51 |
| Qes | 0.54 |
| Qms | 9.04 |
| Vas | 36.4 L |
| Sd | 344.9 cm² |
| Xmax | 1.6 mm |
| Re | 5.43 Ω |
| Bl | 10.8 T·m |
| Mms | 29.2 g |
| Pe | 300 W |
| Sensitivity | 95.9 dB |
Alignment hint
| EBP | 117 · ported |
|---|---|
| Sealed Vb (Qtc ≈ 0.71) | ≈ 39.5 L |
EBP > 100: favours a ported (bass-reflex) alignment.
Rules of thumb from T/S parameters only. Verify against a real simulation before cutting wood.
Substitute candidates
| Driver | Fs (Hz) | Qts | Vas (L) | Xmax (mm) | Sens (dB) | Fit | Notes | Compare |
|---|---|---|---|---|---|---|---|---|
| Eminence GAMMA 10 B | 64.3 +1.3 | 0.529 +0.02 | 37.6 +1.2 | 1.6 = | 92.4 -3.5 | close | 16 Ω vs 8 Ω: amp load changes | + |
| Beyma CM-10 | 61 -2 | 0.506 = | 40.7 +4.3 | 3.6 +2 | 95.4 -0.5 | close | 125 W vs 300 W: lower power handling | + |
| Monacor SPA-110PA | 61 -2 | 0.469 -0.04 | 38 +1.6 | 4 +2.4 | 96.3 +0.4 | close | 150 W vs 300 W: lower power handling | + |
| Hyper Phase CM10 | 65 +2 | 0.511 = | 45 +8.6 | 3.3 +1.7 | 95.6 -0.3 | close | 100 W vs 300 W: lower power handling | + |
| Radian CRS1030 | 65 +2 | 0.472 -0.04 | 35.3 -1.1 | 5.5 +3.9 | 96.2 +0.3 | close | + | |
| Faital PRO 10FE400 | 60 -3 | 0.47 -0.04 | 35.3 -1.1 | 5.42 +3.82 | 96 +0.1 | close | 200 W vs 300 W: lower power handling | + |
| Celestion K10-200E | 67 +4 | 0.471 -0.04 | 37 +0.6 | 4 +2.4 | 97.3 +1.4 | close | 200 W vs 300 W: lower power handling | + |
| Ciare CMI 250 ND | 59 -4 | 0.496 -0.01 | 34 -2.4 | 4.5 +2.9 | 97.5 +1.6 | close | 4 Ω vs 8 Ω: amp load changes · 220 W vs 300 W: lower power handling | + |
| Peerless FSL-1015R02-08 | 68.4 +5.4 | 0.616 +0.11 | 37.7 +1.3 | 2.2 +0.6 | 95.9 = | close | 75 W vs 300 W: lower power handling | + |
| Audax PR24LXT100 | 63 = | 0.474 -0.04 | 46 +9.6 | 3 +1.4 | 95.5 -0.4 | close | 100 W vs 300 W: lower power handling | + |
Compare the closest 3 against the GAMMA 10 →
Ranked on parameter similarity only (Qts, Fs, Vas, Xmax, sensitivity). Same nominal size required. A hint, not a simulation, model the swap before cutting or buying.
Used in enclosures (0)
No enclosure in the catalog uses this driver yet.