Eminence ELIMINATOR 2510
Thiele-Small parameters
| Nominal size | 10" |
|---|---|
| Impedance | 4 Ω |
| Fs | 49.5 Hz |
| Qts | 0.472 |
| Qes | 0.49 |
| Qms | 12.88 |
| Vas | 40.3 L |
| Sd | 355.4 cm² |
| Xmax | 3 mm |
| Re | 3.74 Ω |
| Bl | 10.4 T·m |
| Mms | 45.4 g |
| Pe | 300 W |
| Sensitivity | 95.3 dB |
Alignment hint
| EBP | 101 · ported |
|---|---|
| Sealed Vb (Qtc ≈ 0.71) | ≈ 32.4 L |
EBP > 100: favours a ported (bass-reflex) alignment.
Rules of thumb from T/S parameters only. Verify against a real simulation before cutting wood.
Substitute candidates
| Driver | Fs (Hz) | Qts | Vas (L) | Xmax (mm) | Sens (dB) | Fit | Notes | Compare |
|---|---|---|---|---|---|---|---|---|
| SpeaKa CPA10-100 | 56.3 +6.8 | 0.437 -0.03 | 39.4 -0.9 | 3 = | 93.9 -1.4 | close | 8 Ω vs 4 Ω: amp load changes · 100 W vs 300 W: lower power handling | + |
| Zeuz 10500X | 48.4 -1.1 | 0.445 -0.03 | 34.6 -5.7 | 4.3 +1.3 | 94.5 -0.8 | close | + | |
| Eminence BASSLITE CA2010 | 51 +1.5 | 0.505 +0.03 | 49 +8.7 | 3.5 +0.5 | 94.6 -0.7 | close | 8 Ω vs 4 Ω: amp load changes · 150 W vs 300 W: lower power handling | + |
| Eminence LEGEND CA10 | 52.9 +3.4 | 0.456 -0.02 | 51.1 +10.8 | 3 = | 96 +0.7 | close | 8 Ω vs 4 Ω: amp load changes · 200 W vs 300 W: lower power handling | + |
| Beyma CM-10 | 61 +11.5 | 0.506 +0.03 | 40.7 +0.4 | 3.6 +0.6 | 95.4 +0.1 | close | 8 Ω vs 4 Ω: amp load changes · 125 W vs 300 W: lower power handling | + |
| Monacor SPA-10PA | 54 +4.5 | 0.445 -0.03 | 37 -3.3 | 4 +1 | 93.5 -1.8 | close | 8 Ω vs 4 Ω: amp load changes · 150 W vs 300 W: lower power handling | + |
| Monacor SPA-110PA | 61 +11.5 | 0.469 = | 38 -2.3 | 4 +1 | 96.3 +1 | close | 8 Ω vs 4 Ω: amp load changes · 150 W vs 300 W: lower power handling | + |
| Audax PR24LXT100 | 63 +13.5 | 0.474 = | 46 +5.7 | 3 = | 95.5 +0.2 | close | 8 Ω vs 4 Ω: amp load changes · 100 W vs 300 W: lower power handling | + |
| Eminence BASSLITE CH2010 | 58 +8.5 | 0.438 -0.03 | 43 +2.7 | 3.5 +0.5 | 96.2 +0.9 | close | 8 Ω vs 4 Ω: amp load changes · 150 W vs 300 W: lower power handling | + |
| Oberton 10B100 | 44 -5.5 | 0.447 -0.02 | 40.5 +0.2 | 4.4 +1.4 | 92.5 -2.8 | close | 8 Ω vs 4 Ω: amp load changes · 100 W vs 300 W: lower power handling | + |
Compare the closest 3 against the ELIMINATOR 2510 →
Ranked on parameter similarity only (Qts, Fs, Vas, Xmax, sensitivity). Same nominal size required. A hint, not a simulation, model the swap before cutting or buying.
Used in enclosures (0)
No enclosure in the catalog uses this driver yet.