Eminence DELTALITE II 2510 (prodance)

10" · 8 Ω · 250 W · 96.9 dB · datasheet ↗

Thiele-Small parameters

Nominal size	10"
Impedance	8 Ω
Fs	53.4 Hz
Qts	0.384
Qes	0.41
Qms	6.01
Vas	50.9 L
Sd	346.4 cm²
Xmax	4.2 mm
Re	4.86 Ω
Bl	10.8 T·m
Mms	29.3 g
Pe	250 W
Sensitivity	96.9 dB

Alignment hint

EBP	130 · ported
Sealed Vb (Qtc ≈ 0.71)	≈ 21.3 L

EBP > 100: favours a ported (bass-reflex) alignment.

Rules of thumb from T/S parameters only. Verify against a real simulation before cutting wood.

Substitute candidates

Driver	Fs (Hz)	Qts	Vas (L)	Xmax (mm)	Sens (dB)	Fit	Notes	Compare
B&C 10 HPL 51	55 +1.6	0.367 -0.02	50 -0.9	4 -0.2	97.1 +0.2	close	150 W vs 250 W: lower power handling · Xmax 4 mm < 4.2 mm: lower excursion-limited SPL	+
Eminence DELTALITE II 2510	53 -0.4	0.417 +0.03	52.5 +1.6	4.2 =	96.4 -0.5	close		+
Eminence DELTALITE II 2510-4	55 +1.6	0.381 =	54.5 +3.6	4.2 =	99.2 +2.3	close	4 Ω vs 8 Ω: amp load changes	+
SICA 10 C 2 CP	54 +0.6	0.339 -0.04	53.6 +2.7	4 -0.2	96.6 -0.3	close	150 W vs 250 W: lower power handling · Xmax 4 mm < 4.2 mm: lower excursion-limited SPL	+
Faital PRO 10PR320	50 -3.4	0.38 =	50.6 -0.3	7.27 +3.07	95 -1.9	close	16 Ω vs 8 Ω: amp load changes	+
Faital PRO 10FE300	50 -3.4	0.39 +0.01	49 -1.9	5.47 +1.27	94 -2.9	close	4 Ω vs 8 Ω: amp load changes	+
Volt BM251.3 PA	55 +1.6	0.346 -0.04	44 -6.9	4.8 +0.6	96.8 -0.1	close		+
LaVoce NBASS10-20	52 -1.4	0.39 +0.01	43.38 -7.52	6.6 +2.4	95.5 -1.4	close	150 W vs 250 W: lower power handling	+
Beyma 10CX25	53 -0.4	0.366 -0.02	66 +15.1	5 +0.8	97.1 +0.2	close		+
SICA 10 FE 2 CP	55.7 +2.3	0.415 +0.03	45.9 -5	4 -0.2	95.5 -1.4	close	150 W vs 250 W: lower power handling · Xmax 4 mm < 4.2 mm: lower excursion-limited SPL	+

Compare the closest 3 against the DELTALITE II 2510 (prodance) →

Ranked on parameter similarity only (Qts, Fs, Vas, Xmax, sensitivity). Same nominal size required. A hint, not a simulation, model the swap before cutting or buying.

Used in enclosures (0)

No enclosure in the catalog uses this driver yet.