Eminence DELTALITE II 2510

10" · 8 Ω · 250 W · 96.4 dB · datasheet ↗

Thiele-Small parameters

Nominal size	10"
Impedance	8 Ω
Fs	53 Hz
Qts	0.417
Qes	0.45
Qms	5.76
Vas	52.5 L
Sd	350.1 cm²
Xmax	4.2 mm
Re	5.06 Ω
Bl	10.5 T·m
Mms	29.5 g
Pe	250 W
Sensitivity	96.4 dB

Alignment hint

EBP	118 · ported
Sealed Vb (Qtc ≈ 0.71)	≈ 28 L

EBP > 100: favours a ported (bass-reflex) alignment.

Rules of thumb from T/S parameters only. Verify against a real simulation before cutting wood.

Substitute candidates

Driver	Fs (Hz)	Qts	Vas (L)	Xmax (mm)	Sens (dB)	Fit	Notes	Compare
Eminence DELTALITE II 2510 (prodance)	53.4 +0.4	0.384 -0.03	50.9 -1.6	4.2 =	96.9 +0.5	close		+
SICA 10 FE 2 CP	55.7 +2.7	0.415 =	45.9 -6.6	4 -0.2	95.5 -0.9	close	150 W vs 250 W: lower power handling · Xmax 4 mm < 4.2 mm: lower excursion-limited SPL	+
Beyma 10CMV2	52 -1	0.418 =	44 -8.5	5.2 +1	94.5 -1.9	close		+
B&C 10 HPL 51	55 +2	0.367 -0.05	50 -2.5	4 -0.2	97.1 +0.7	close	150 W vs 250 W: lower power handling · Xmax 4 mm < 4.2 mm: lower excursion-limited SPL	+
Beyma 10CM/V2	52 -1	0.42 =	44 -8.5	6.5 +2.3	95 -1.4	close		+
Eminence DELTALITE II 2510-4	55 +2	0.381 -0.04	54.5 +2	4.2 =	99.2 +2.8	close	4 Ω vs 8 Ω: amp load changes	+
SICA 10 C 2 CP	54 +1	0.339 -0.08	53.6 +1.1	4 -0.2	96.6 +0.2	close	150 W vs 250 W: lower power handling · Xmax 4 mm < 4.2 mm: lower excursion-limited SPL	+
Eminence BETA 10CX	49 -4	0.397 -0.02	64.2 +11.7	5 +0.8	96 -0.4	close		+
Faital PRO 10FE300	50 -3	0.39 -0.03	49 -3.5	5.47 +1.27	94 -2.4	close	4 Ω vs 8 Ω: amp load changes	+
Faital PRO 10PR320	50 -3	0.38 -0.04	50.6 -1.9	7.27 +3.07	95 -1.4	close	16 Ω vs 8 Ω: amp load changes	+

Compare the closest 3 against the DELTALITE II 2510 →

Ranked on parameter similarity only (Qts, Fs, Vas, Xmax, sensitivity). Same nominal size required. A hint, not a simulation, model the swap before cutting or buying.

Used in enclosures (0)

No enclosure in the catalog uses this driver yet.