Eminence DELTA PRO 10MR-8

10" · 8 Ω · 200 W · 98.7 dB · datasheet ↗

Thiele-Small parameters

Nominal size	10"
Impedance	8 Ω
Fs	53 Hz
Qts	0.232
Qes	0.24
Qms	6.77
Vas	61.4 L
Sd	355.4 cm²
Xmax	1.3 mm
Re	6.55 Ω
Bl	15.4 T·m
Mms	26 g
Pe	200 W
Sensitivity	98.7 dB

Alignment hint

EBP	221 · ported
Sealed Vb (Qtc ≈ 0.71)	≈ 7.4 L

EBP > 100: favours a ported (bass-reflex) alignment.

Rules of thumb from T/S parameters only. Verify against a real simulation before cutting wood.

Substitute candidates

Driver	Fs (Hz)	Qts	Vas (L)	Xmax (mm)	Sens (dB)	Fit	Notes	Compare
Beyma 10G100	56 +3	0.21 -0.02	65 +3.6	1.5 +0.2	100.1 +1.4	close	80 W vs 200 W: lower power handling	+
Beyma 10M250	50 -3	0.214 -0.02	64 +2.6	3.5 +2.2	99 +0.3	close		+
Ciare CH252	55 +2	0.246 +0.01	52 -9.4	1.4 +0.1	101 +2.3	close	4 Ω vs 8 Ω: amp load changes · 150 W vs 200 W: lower power handling	+
David Eden EC1060XL8	49.6 -3.4	0.207 -0.03	55.5 -5.9	2.4 +1.1	98.8 +0.1	close	150 W vs 200 W: lower power handling	+
Warehouse Sound WGS 12L	49.6 -3.4	0.242 +0.01	50.5 -10.9	3.3 +2	97.3 -1.4	usable		+
Beyma 10MI100 v2017	50 -3	0.213 -0.02	54 -7.4	4.5 +3.2	97.9 -0.8	usable		+
Beyma 10"MI100	50 -3	0.21 -0.02	54 -7.4	4.5 +3.2	98 -0.7	usable		+
Eminence KAPPALITE 3010 MB	50.7 -2.3	0.204 -0.03	52.1 -9.3	5 +3.7	99.1 +0.4	usable		+
Beyma 10G150	47 -6	0.246 +0.01	75 +13.6	3.7 +2.4	97 -1.7	usable	125 W vs 200 W: lower power handling	+
Faital PRO 10PR300	50 -3	0.24 +0.01	49.8 -11.6	4.92 +3.62	96 -2.7	usable	4 Ω vs 8 Ω: amp load changes	+

Compare the closest 3 against the DELTA PRO 10MR-8 →

Ranked on parameter similarity only (Qts, Fs, Vas, Xmax, sensitivity). Same nominal size required. A hint, not a simulation, model the swap before cutting or buying.

Used in enclosures (0)

No enclosure in the catalog uses this driver yet.