← all drivers

Eminence DELTA 15 LF

15" · 8 Ω · 600 W · 96 dB · datasheet ↗

Thiele-Small parameters

Nominal size15"
Impedance8 Ω
Fs41 Hz
Qts0.584
Qes0.64
Qms6.65
Vas186.1 L
Sd856.3 cm²
Xmax6 mm
Re6.3 Ω
Bl14.5 T·m
Mms83.2 g
Pe600 W
Sensitivity96 dB

Alignment hint

EBP64 · flexible
Sealed Vb (Qtc ≈ 0.71)≈ 399.3 L

EBP 50-100: works in either a sealed or ported alignment.

Rules of thumb from T/S parameters only. Verify against a real simulation before cutting wood.

Substitute candidates

DriverFs (Hz)QtsVas (L)Xmax (mm)Sens (dB)FitNotesCompare
JB Systems PWX15-30040.1 -0.90.552 -0.03169.9 -16.25 -196 =close300 W vs 600 W: lower power handling · Xmax 5 mm < 6 mm: lower excursion-limited SPL+
Fane 15-400LF39 -20.577 -0.01210 +23.95 -196.1 +0.1close400 W vs 600 W: lower power handling · Xmax 5 mm < 6 mm: lower excursion-limited SPL+
Fane 15-400LF v201641 =0.573 -0.01210 +23.95 -197.1 +1.1close400 W vs 600 W: lower power handling · Xmax 5 mm < 6 mm: lower excursion-limited SPL+
Fane SOVEREIGN 15-400 LF41 =0.573 -0.01210 +23.95 -197.1 +1.1close400 W vs 600 W: lower power handling · Xmax 5 mm < 6 mm: lower excursion-limited SPL+
Selenium 38GPT1242.2 +1.20.657 +0.07185.7 -0.45 -195.8 -0.2close200 W vs 600 W: lower power handling · Xmax 5 mm < 6 mm: lower excursion-limited SPL+
SB Audience BIANCO-15MW20044 +30.586 =153 -33.15.2 -0.896 =close200 W vs 600 W: lower power handling · Xmax 5.2 mm < 6 mm: lower excursion-limited SPL+
Realistic PRO 250 vp47.3 +6.30.619 +0.04196.6 +10.55.5 -0.597.9 +1.9close250 W vs 600 W: lower power handling · Xmax 5.5 mm < 6 mm: lower excursion-limited SPL+
B&C 15 FCX 7640 -10.445 -0.14187 +0.96.5 +0.597.9 +1.9usable400 W vs 600 W: lower power handling+
Faital PRO 15FH52042 +10.62 +0.04134.2 -51.99 +397 +1usable16 Ω vs 8 Ω: amp load changes+
SB Audience BIANCO-15OB350 V234 -70.572 -0.01212.7 +26.68.4 +2.493.9 -2.1usable350 W vs 600 W: lower power handling+

Compare the closest 3 against the DELTA 15 LF →

Ranked on parameter similarity only (Qts, Fs, Vas, Xmax, sensitivity). Same nominal size required. A hint, not a simulation, model the swap before cutting or buying.

Used in enclosures (0)

No enclosure in the catalog uses this driver yet.