Eminence DELTA 15 A
Thiele-Small parameters
| Nominal size | 15" |
|---|---|
| Impedance | 8 Ω |
| Fs | 40 Hz |
| Qts | 0.532 |
| Qes | 0.57 |
| Qms | 8.05 |
| Vas | 270.7 L |
| Sd | 864.6 cm² |
| Xmax | 1.6 mm |
| Re | 6.3 Ω |
| Bl | 13 T·m |
| Mms | 61.3 g |
| Pe | 400 W |
| Sensitivity | 97.8 dB |
Alignment hint
| EBP | 70 · flexible |
|---|---|
| Sealed Vb (Qtc ≈ 0.71) | ≈ 353.1 L |
EBP 50-100: works in either a sealed or ported alignment.
Rules of thumb from T/S parameters only. Verify against a real simulation before cutting wood.
Substitute candidates
| Driver | Fs (Hz) | Qts | Vas (L) | Xmax (mm) | Sens (dB) | Fit | Notes | Compare |
|---|---|---|---|---|---|---|---|---|
| Eminence DELTA 15 | 40 = | 0.499 -0.03 | 263 -7.7 | 1.6 = | 97.6 -0.2 | close | + | |
| Eminence DELTA-15A | 40 = | 0.53 = | 270.7 = | 2.7 +1.1 | 100 +2.2 | close | + | |
| Altec 420-8B vp rouge | 34.9 -5.1 | 0.53 = | 277.6 +6.9 | 2.3 +0.7 | 97.1 -0.7 | close | 25 W vs 400 W: lower power handling | + |
| Eminence ME15-2008 | 40.3 +0.3 | 0.49 -0.04 | 293.1 +22.4 | 2.7 +1.1 | 98.1 +0.3 | close | 100 W vs 400 W: lower power handling | + |
| LaVoce FBASS15-20 | 40 = | 0.53 = | 234.41 -36.29 | 4.3 +2.7 | 98 +0.2 | close | 200 W vs 400 W: lower power handling | + |
| P.Audio E15-150S | 42.9 +2.9 | 0.528 = | 245.7 -25 | 2.5 +0.9 | 99.3 +1.5 | close | 150 W vs 400 W: lower power handling | + |
| Ardan PRO W-38 vp2 | 39.5 -0.5 | 0.51 -0.02 | 254.7 -16 | 4.5 +2.9 | 97 -0.8 | close | 200 W vs 400 W: lower power handling | + |
| Supravox 380-2000 LC | 38.7 -1.3 | 0.568 +0.04 | 272.2 +1.5 | 5 +3.4 | 97.3 -0.5 | close | 120 W vs 400 W: lower power handling | + |
| Eminence DELTALITE 2515 | 41 +1 | 0.517 -0.02 | 284.1 +13.4 | 4.8 +3.2 | 99 +1.2 | close | 300 W vs 400 W: lower power handling | + |
| Celestion TRUVOX 1525 | 40 = | 0.452 -0.08 | 247 -23.7 | 2.5 +0.9 | 98.8 +1 | close | 250 W vs 400 W: lower power handling | + |
Compare the closest 3 against the DELTA 15 A →
Ranked on parameter similarity only (Qts, Fs, Vas, Xmax, sensitivity). Same nominal size required. A hint, not a simulation, model the swap before cutting or buying.
Used in enclosures (0)
No enclosure in the catalog uses this driver yet.