Eminence DEFINIMAX 4012 HO
Thiele-Small parameters
| Nominal size | 12" |
|---|---|
| Impedance | 8 Ω |
| Fs | 46 Hz |
| Qts | 0.356 |
| Qes | 0.38 |
| Qms | 5.74 |
| Vas | 59.4 L |
| Sd | 552 cm² |
| Xmax | 6.2 mm |
| Re | 5.85 Ω |
| Bl | 19.6 T·m |
| Mms | 86.1 g |
| Pe | 600 W |
| Sensitivity | 95.2 dB |
Alignment hint
| EBP | 121 · ported |
|---|---|
| Sealed Vb (Qtc ≈ 0.71) | ≈ 20.2 L |
EBP > 100: favours a ported (bass-reflex) alignment.
Rules of thumb from T/S parameters only. Verify against a real simulation before cutting wood.
Substitute candidates
| Driver | Fs (Hz) | Qts | Vas (L) | Xmax (mm) | Sens (dB) | Fit | Notes | Compare |
|---|---|---|---|---|---|---|---|---|
| Oberton 12B45V | 47.88 +1.88 | 0.354 = | 58.51 -0.89 | 10.5 +4.3 | 94 -1.2 | close | 450 W vs 600 W: lower power handling | + |
| Faital PRO 12HP1010 | 45 -1 | 0.34 -0.02 | 56.5 -2.9 | 9.25 +3.05 | 96 +0.8 | close | + | |
| Eminence DEFINIMAX 4012HO | 51 +5 | 0.35 -0.01 | 53.801 -5.6 | 6.2 = | 94.8 -0.4 | close | + | |
| Beyma POWER 12 vp | 42.7 -3.3 | 0.358 = | 53.1 -6.3 | 5.9 -0.3 | 96.2 +1 | close | 4 Ω vs 8 Ω: amp load changes · Xmax 5.9 mm < 6.2 mm: lower excursion-limited SPL | + |
| Precision Devices PD.123C01 | 46 = | 0.32 -0.04 | 66.82 +7.42 | 7 +0.8 | 94.9 -0.3 | close | 400 W vs 600 W: lower power handling | + |
| B&C 12 NDL 88 16 Ohms | 50 +4 | 0.363 +0.01 | 55 -4.4 | 7.1 +0.9 | 93.1 -2.1 | close | 16 Ω vs 8 Ω: amp load changes | + |
| 18 Sound 12NTLS3500 | 41 -5 | 0.34 -0.02 | 63 +3.6 | 7.9 +1.7 | 94.5 -0.7 | close | 4 Ω vs 8 Ω: amp load changes | + |
| Celestion CF1230BMB | 43 -3 | 0.381 +0.03 | 60.7 +1.3 | 5.5 -0.7 | 94 -1.2 | close | 350 W vs 600 W: lower power handling · Xmax 5.5 mm < 6.2 mm: lower excursion-limited SPL | + |
| Precision Devices PD.12SB30 | 47 +1 | 0.31 -0.05 | 66.82 +7.42 | 7 +0.8 | 95.2 = | close | 400 W vs 600 W: lower power handling | + |
| 18 Sound 12NLW9300 v2022 | 47 +1 | 0.416 +0.06 | 56 -3.4 | 8 +1.8 | 95.4 +0.2 | close | + |
Compare the closest 3 against the DEFINIMAX 4012 HO →
Ranked on parameter similarity only (Qts, Fs, Vas, Xmax, sensitivity). Same nominal size required. A hint, not a simulation, model the swap before cutting or buying.
Used in enclosures (0)
No enclosure in the catalog uses this driver yet.