Eminence COMMONWEALTH 12
Thiele-Small parameters
| Nominal size | 12" |
|---|---|
| Impedance | 8 Ω |
| Fs | 50 Hz |
| Qts | 0.332 |
| Qes | 0.35 |
| Qms | 6.61 |
| Vas | 90 L |
| Sd | 519.5 cm² |
| Xmax | 0.7 mm |
| Re | 6.34 Ω |
| Bl | 15.6 T·m |
| Mms | 42.6 g |
| Pe | 225 W |
| Sensitivity | 98.1 dB |
Alignment hint
| EBP | 143 · ported |
|---|---|
| Sealed Vb (Qtc ≈ 0.71) | ≈ 25.5 L |
EBP > 100: favours a ported (bass-reflex) alignment.
Rules of thumb from T/S parameters only. Verify against a real simulation before cutting wood.
Substitute candidates
| Driver | Fs (Hz) | Qts | Vas (L) | Xmax (mm) | Sens (dB) | Fit | Notes | Compare |
|---|---|---|---|---|---|---|---|---|
| B&C 12 CXT | 49 -1 | 0.321 -0.01 | 91 +1 | 3 +2.3 | 98.6 +0.5 | close | + | |
| Altec 920-8B | 48 -2 | 0.362 +0.03 | 85 -5 | 1.3 +0.6 | 97.4 -0.7 | close | 125 W vs 225 W: lower power handling | + |
| Jensen J12/200-8 | 50 = | 0.368 +0.04 | 89 -1 | 2 +1.3 | 97.5 -0.6 | close | + | |
| Ciare PW320ND | 49 -1 | 0.345 +0.01 | 87 -3 | 3 +2.3 | 97.8 -0.3 | close | 150 W vs 225 W: lower power handling | + |
| PD P12/150 | 51 +1 | 0.318 -0.01 | 80 -10 | 2.3 +1.6 | 98.2 +0.1 | close | 150 W vs 225 W: lower power handling | + |
| Precision Devices P12/150 | 51 +1 | 0.318 -0.01 | 80 -10 | 2.3 +1.6 | 98.2 +0.1 | close | 150 W vs 225 W: lower power handling | + |
| Eminence DELTA 12 A | 51 +1 | 0.353 +0.02 | 81.7 -8.3 | 2.4 +1.7 | 98.1 = | close | + | |
| Benett 12.180 X/N | 49 -1 | 0.325 -0.01 | 100.9 +10.9 | 3 +2.3 | 98.5 +0.4 | close | 100 W vs 225 W: lower power handling | + |
| Audax PR33ST150 | 46 -4 | 0.327 -0.01 | 90 = | 3.5 +2.8 | 97.2 -0.9 | close | 150 W vs 225 W: lower power handling | + |
| Altec 917-8A | 45.3 -4.7 | 0.298 -0.03 | 95.1 +5.1 | 1.3 +0.6 | 97.5 -0.6 | close | 60 W vs 225 W: lower power handling | + |
Compare the closest 3 against the COMMONWEALTH 12 →
Ranked on parameter similarity only (Qts, Fs, Vas, Xmax, sensitivity). Same nominal size required. A hint, not a simulation, model the swap before cutting or buying.
Used in enclosures (0)
No enclosure in the catalog uses this driver yet.